Baby Trend 7678T 7639T To Unfold Stroller, Seatback Positioning, Footrests, Brakes, Canopies

Page 3

of the tray with a small object such as a closed ballpoint pen. Simultaneously pull outward on the tray until removed. See figure 4. Insert the fabric crotch pad into the slot on the child tray and snap together. See figure 4a.

6. To attach the parent tray, position the tray so that the warning statement on the inside can be read from the normal position of pushing the stroller. Push the tray male end fittings into the plastic female fittings on the inside of the stroller handle. Check that the tray is securely latched in place. Please see figure 5. To remove parent tray, pull upward on the tray.

WARNING: Do not place hot liquids in the parent tray. Hot liquids can burn your child. Do not place more than 3 pounds in the tray as it may cause a hazardous unstable condition to exist.

TO UNFOLD STROLLER

1. Disengage the side locking latch located near the top of the stroller handle on the right side. Please see figure 16.

2. Place one hand on the handlebar and one hand on the front child tray and push your hands apart until the stroller is unfolded and locked. Please see figure 6. The stroller will lock into the open position automatically. Please check that the stroller has locked open before placing your children in the stroller.

3. Pull the canopies forward until fully open. The rear seat canopy must be snapped to the back of the rear seat, on both the left and right sides.

SEATBACK POSITIONING

The front and middle seats have a 2-position adjustment. The rear seat has a 3-position adjustment: upright, semi-recline and reclined. To adjust the recline of any seat, pull up on the release wire until the latch is released and place the seat back in the desired position. Ensure that seat back is locked. See figure 7.

WARNING: Child may slip into leg openings and strangle. Never use the rear seat’s fully reclined position unless you close the footrest opening

as follows:

1. Remove the boot from the rear pouch located on the back of the middle seat.

2. Snap the sides of the boot to the outside of the side panels of the rear seat. See figure 8a.

3. Snap the boot to the underside of the seat pad of the rear seat. See figure 8b. Please ensure that when completed

Figure 5.

Figure 6.

Figure 7.

Figure 8a.

Figure 8b.

4

the footrest area is completely closed off.

FOOTRESTS

Footrests have 2 positions: lowered and raised. To raise, lift the footrest and hook the underneath support bar into the hooks on the underside of the footrest. See figure 9.

BRAKES

To engage brakes, apply light downward pressure to the brake lever located on the insides of both the left and right wheels. To release, gently lift up on the brake lever. See figure 10. Always set brakes when the stroller is not being pushed so that the stroller will not roll away. Never leave stroller unattended on a hill or incline as the stroller may slide down the hill.

CANOPIES

All three canopies are removable. To remove a canopy, depress the retainer clip located on the inside of the canopy base while applying light upward pressure to the canopy frame. The canopy should slide out easily if the retainer clip is completely depressed. If you experience difficulty, apply increased pressure on the retaining clip and not on the canopy frame. Repeat for the opposite side. See figure 11.

SEAT BELTS

WARNING: Avoid serious injury from falling or sliding out. Always use the seat belts.

1 The shoulder straps of the 5-point harness has 2 attachment po- sitions. Select the loop position that places the shoulder strap level with, or below the top of the child’s shoulder and feed the shoulder harness under the correct loop. Please see figure11a.

2. Carefully place the child in the stroller seat and bring the safety harness around the child’s waist and over the shoulders. Place the crotch strap and between the child’s legs. Insert the male end of each shoulder / waist belt into the buckle on the crotch strap. Tighten the harness to be snug around the child’s waist and over the child’s shoulders. Please see figure 12.

3. To release, apply pressure to both sides of each male clip until the clip is released. This process requires a moderate amount of effort so as to prevent an accidental release by your child. NOTE: Buckles may be hard to release when 1st used.

Figure 9.

Figure 10.

Figure 11.

Figure 12.

Shoulder Strap

Waist Squeeze

Strap

 

Adjust for a

Crotch Strap

snug fit

Figure 12.

 

 

5

Image 3
Contents Triplet Stroller Baby TREND, INC Triplet StrollerBrakes To Unfold StrollerSeatback Positioning FootrestsTo Fold Stroller StopExercise care when folding the stroller

7678T 7639T specifications

The Baby Trend 7678T and 7639T represent two of the brand’s innovative travel systems designed with both functionality and safety in mind. These models are crafted to cater to the needs of modern parents, making outings with babies more convenient and enjoyable.

One of the standout features of both the 7678T and 7639T is their versatility. Each system includes a stroller that is compatible with Baby Trend's infant car seats, allowing for seamless transitions between car and stroller. This feature is particularly beneficial for parents who are frequently on the go, as it eliminates the hassle of waking a sleeping baby during transfers.

Safety is a top priority for Baby Trend, and both models come equipped with advanced safety features. The car seats feature side impact head protection and a 5-point harness, ensuring a snug and secure fit for your child. Additionally, both strollers incorporate an adjustable canopy that provides UV protection, safeguarding your little one from harmful sun exposure and ensuring comfort during outdoor adventures.

The Baby Trend 7678T and 7639T boast user-friendly designs that simplify everyday tasks. The strollers are foldable with a one-hand folding mechanism, making them easy to store and transport. They also feature a parent tray with cup holders, a child tray with cup holders, and ample storage baskets, which are essential for carrying essentials during outings.

In terms of comfort, these travel systems do not disappoint. The seats are well-padded, reclinable, and accommodate growing children up to 50 pounds in weight. The adjustable handle height caters to parents of varying heights, enhancing comfort during strolls.

Both models are engineered with durable, smooth-rolling tires, allowing for effortless maneuverability across various terrains. The locking front swivel wheels provide stability, giving parents confidence while navigating through busy environments.

In conclusion, the Baby Trend 7678T and 7639T travel systems offer a perfect blend of safety, convenience, and versatility. With their thoughtful design and practical features, they are ideal choices for today's active families who prioritize safety and ease of use. Whether it’s a quick trip to the store or a day out in the park, these systems are tailored to meet the dynamic needs of parents and their little ones.