Sharp CD-SW200E operation manual Aerial connection, Speaker connection

Page 10

CD-SW200E

System connections (continued)

Preparation for Use

10

Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

Installing the AM loop aerial:

 

< Assembling >

< Attaching to the wall >

Wall Screws (not supplied)

Speaker connection

FRONT SPEAKERS:

Connect the black wire to the FRONT SPEAKERS minus (-) terminal, and the red wire to the FRONT SPEAKERS plus (+) terminal.

SUBWOOFER:

1.Connect the black wire to the SUBWOOFER minus (-) terminal, and the red wire with purple insulation tube to the SUBWOOFER plus (+) terminal.

Purple

Red

 

Black

2.Connect the subwoofer light-up wire to the SUBWOOFER LIGHT-UP socket.

SUBWOOFER

Caution:

Never mistake the FRONT SPEAKERS and the SUBWOOFER terminals. The unit or the speakers may be damaged.

If you use other speakers with an impedance lower than that specified, the unit may be damaged. Front speakers: 6 ohms,

Subwoofer: 12 ohms.

 

Do not mistake the right and the left

 

channels. The right speaker is the one on the

 

right side when you face the unit.

 

Do not let the bare speaker wires touch

 

each other.

 

Do not stand or sit on the speakers. You may

 

be injured.

 

Do not allow any objects to fall into or to be

Incorrect

placed in the bass reflex duct.

 

17/03/05 CD-SW200EA 02-12.fm

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CD-SW200E Thank you for purchasing this Sharp productSpecial notes Important InstructionAccessories ContentsGeneral Information CD-SW200EPrecautionsVolume control GeneralControls and indicators Front panelDisplay Rear panelFront Speaker Tweeter Super Tweeter Woofer Bass Reflex Duct Speaker WireSubwoofer Disc Clear/Dimmer Button Remote controlTuner Band Button Disc Stop ButtonSystem connections Speaker connection see Subwoofer Light-up wireAC power connection see Preparation for UseAerial connection Speaker connectionFor AC power connectionDemonstration mode Placing the speaker systemTest of the remote control Remote controlBattery installation Close the battery cover Precautions for battery useGeneral control Basic OperationTo confirm the time display CD-SW200ESetting the clockTo readjust the clock To change the 24-hour or 12-hour displayListening to a CD or MP3/WMA disc Auto power on functionAuto power off function CD or MP3/WMA disc PlaybackTo exchange other discs whilst playing a disc Press the OPEN/CLOSE button to close the disc trayTo remove the discs Various disc functions To change the display MP3/WMA discs onlyDirect track search CD-SW200EAdvanced CD or MP3/WMA disc playbackTo specify a disc to play To stop playbackRepeat play PlaybackRandom play Adding tracks to the programme To cancel the programmed play modeProgrammed play To check which tracks are programmedMP3/WMA navigation MP3/WMA navigation only for MP3/WMA filesExample File search by folder or title 1/2/3 Character search for folder or title 1/2/3 Programmed play for folder, title 1/2/3 To check, add or delete programmed contentsRepeat for other folders or titles Listening to the radio TuningAuto tuning RadioMemorising a station To scan the preset stationsTo erase entire preset memory To recall a memorised stationListening to a cassette tape Tape 1 or Tape Tape PlaybackVarious tape functions Fast Press in the playback Forward Or stop mode RewindRecording on a cassette tape OnlyPress the button Tape RecordingRecording from a CD or MP3/WMA disc To stop recordingDubbing from tape to tape Recording from the radioErasing recorded tapes Advanced Features Timer and sleep operationTimer playback or timer recording 05/3/8 CD-SW200EA 31-40 .fm Set the time to finish as in steps 6 and 7 aboveCancelling the timer setting in the timer stand-by mode Daily timerChecking the timer setting in the timer stand-by mode Reusing the memorised timer settingTo use timer and sleep operation together Sleep operationListening to playback sounds of Game, VCR, DVD, etc FeaturesEnhancing your system To record on a tape from game, VCR, etcSymptom Possible cause Troubleshooting chartHeadphones CD playerTuner ReferencesCassette deck CondensationIf trouble occurs Before transporting the unit Clearing all the memory resetIf such a problem occurs, do the following Care of compact discsCleaning the tape-handling parts MaintenanceSpecificationsCD-SW200E Cleaning the cabinetType Signal readoutPower Rated input power ConverterTINSKA001AWZZ TINSKA001AWZZ 1300 135 Warranty

CD-SW200E specifications

The Sharp CD-SW200E is a versatile and compact CD player and radio system, designed to provide high-quality audio performance and a range of features for music enthusiasts. This system is ideal for both casual listeners and those who appreciate the finer details of sound, making it a popular choice for various settings, from home use to office environments.

One of the standout features of the CD-SW200E is its ability to play a variety of formats. While it excels as a traditional CD player, it also supports CD-R and CD-RW playback, allowing users to enjoy their custom mixes and favorite tracks stored on writable CDs. The inclusion of a USB port adds further convenience, enabling users to connect USB flash drives and play MP3 files directly from the device, making it a versatile solution for modern listening habits.

Another key characteristic of the Sharp CD-SW200E is its FM/AM tuner. This feature allows users to explore a wide range of radio stations, providing access to local broadcasts and specialized programming. The integrated digital tuning system enhances user experience by delivering clear and precise station selection while the preset memory lets users save their favorite stations for quick access.

In terms of audio quality, the CD-SW200E is equipped with advanced sound technologies. It features a built-in amplifier that delivers powerful output, ensuring that music is heard clearly and with rich detail. The system also includes a bass boost function, enhancing low-frequency sounds, which is particularly appreciated by fans of bass-heavy music genres.

The design of the Sharp CD-SW200E is sleek and modern, making it a stylish addition to any space. Its compact size allows for easy placement on shelves, desks, or kitchen countertops. The user-friendly interface, complete with an intuitive control panel and a remote control, makes navigation simple and straightforward, allowing users to manage their listening experience effortlessly.

Additional features of the CD-SW200E include a clock and alarm function, making it a practical choice for use in the bedroom or kitchen. This multifunction gadget combines entertainment with practicality, offering a complete audio solution for various lifestyle needs.

Overall, the Sharp CD-SW200E stands out as a powerful, versatile audio system that caters to the needs of a diverse audience. With its range of features, advanced audio technologies, and attractive design, it is an excellent choice for anyone looking to enhance their music listening experience.
Top Page Image Contents