Sharp CD-SW200E Memorising a station, To recall a memorised station, To scan the preset stations

Page 26

CD-SW200E

Listening to the radio (continued)

Radio

Memorising a station

You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)

1Perform steps 1 - 3 in "Tuning" on page 25.

2Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode.

3Within 30 seconds, press the PRESET ( or ) button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

4Within 30 seconds, press the MEMORY/SET (MEMORY) button to store that station in memory.

If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a pre- set station.

When a new station is stored in memory, the station previously memorised for that preset channel number will be erased.

Note:

The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead become discon- nected.

To recall a memorised station

Press the PRESET ( or ) button for less than 0.5 seconds to se- lect the desired station.

To scan the preset stations

The stations saved in memory can be scanned automatically. (Pre- set memory scan)

1Press the PRESET ( or ) button for more than 0.5 seconds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.

2Press the PRESET ( or ) button again when the desired sta- tion is located.

CD-SW200

PRESET

To erase entire preset memory

1Press the ON/STAND-BY button to enter the stand-by mode.

2Whilst pressing down the button and the X-BASS (SUR- ROUND)/DEMO button, press the TUNING button until "TUN- ER CL" appears.

26

05/3/8 CD-SW200EA 23- 30.fm

Page 25 Page 27
Image 26
Page 25 Page 27
Contents CD-SW200E Thank you for purchasing this Sharp productSpecial notes Important InstructionAccessories ContentsGeneral Information CD-SW200EPrecautionsVolume control GeneralControls and indicators Front panelDisplay Rear panelSubwoofer Tweeter Super Tweeter Woofer Bass Reflex Duct Speaker WireFront Speaker Disc Clear/Dimmer Button Remote controlTuner Band Button Disc Stop ButtonSystem connections Speaker connection see Subwoofer Light-up wireAC power connection see Preparation for UseAerial connection Speaker connectionFor AC power connectionDemonstration mode Placing the speaker systemTest of the remote control Remote controlBattery installation Close the battery cover Precautions for battery useGeneral control Basic OperationTo confirm the time display CD-SW200ESetting the clockTo readjust the clock To change the 24-hour or 12-hour displayListening to a CD or MP3/WMA disc Auto power on functionAuto power off function CD or MP3/WMA disc PlaybackTo remove the discs Press the OPEN/CLOSE button to close the disc trayTo exchange other discs whilst playing a disc Various disc functions To change the display MP3/WMA discs onlyDirect track search CD-SW200EAdvanced CD or MP3/WMA disc playbackTo specify a disc to play To stop playbackRandom play PlaybackRepeat play Adding tracks to the programme To cancel the programmed play modeProgrammed play To check which tracks are programmedExample MP3/WMA navigation only for MP3/WMA filesMP3/WMA navigation File search by folder or title 1/2/3 Character search for folder or title 1/2/3 Repeat for other folders or titles To check, add or delete programmed contentsProgrammed play for folder, title 1/2/3 Listening to the radio TuningAuto tuning RadioMemorising a station To scan the preset stationsTo erase entire preset memory To recall a memorised stationListening to a cassette tape Tape 1 or Tape Tape PlaybackVarious tape functions Fast Press in the playback Forward Or stop mode RewindRecording on a cassette tape OnlyPress the button Tape RecordingRecording from a CD or MP3/WMA disc To stop recordingErasing recorded tapes Recording from the radioDubbing from tape to tape Timer playback or timer recording Timer and sleep operationAdvanced Features 05/3/8 CD-SW200EA 31-40 .fm Set the time to finish as in steps 6 and 7 aboveCancelling the timer setting in the timer stand-by mode Daily timerChecking the timer setting in the timer stand-by mode Reusing the memorised timer settingTo use timer and sleep operation together Sleep operationListening to playback sounds of Game, VCR, DVD, etc FeaturesEnhancing your system To record on a tape from game, VCR, etcSymptom Possible cause Troubleshooting chartHeadphones CD playerTuner ReferencesCassette deck CondensationIf trouble occurs Before transporting the unit Clearing all the memory resetIf such a problem occurs, do the following Care of compact discsCleaning the tape-handling parts MaintenanceSpecificationsCD-SW200E Cleaning the cabinetType Signal readoutPower Rated input power ConverterTINSKA001AWZZ TINSKA001AWZZ 1300 135 Warranty

CD-SW200E specifications

The Sharp CD-SW200E is a versatile and compact CD player and radio system, designed to provide high-quality audio performance and a range of features for music enthusiasts. This system is ideal for both casual listeners and those who appreciate the finer details of sound, making it a popular choice for various settings, from home use to office environments.

One of the standout features of the CD-SW200E is its ability to play a variety of formats. While it excels as a traditional CD player, it also supports CD-R and CD-RW playback, allowing users to enjoy their custom mixes and favorite tracks stored on writable CDs. The inclusion of a USB port adds further convenience, enabling users to connect USB flash drives and play MP3 files directly from the device, making it a versatile solution for modern listening habits.

Another key characteristic of the Sharp CD-SW200E is its FM/AM tuner. This feature allows users to explore a wide range of radio stations, providing access to local broadcasts and specialized programming. The integrated digital tuning system enhances user experience by delivering clear and precise station selection while the preset memory lets users save their favorite stations for quick access.

In terms of audio quality, the CD-SW200E is equipped with advanced sound technologies. It features a built-in amplifier that delivers powerful output, ensuring that music is heard clearly and with rich detail. The system also includes a bass boost function, enhancing low-frequency sounds, which is particularly appreciated by fans of bass-heavy music genres.

The design of the Sharp CD-SW200E is sleek and modern, making it a stylish addition to any space. Its compact size allows for easy placement on shelves, desks, or kitchen countertops. The user-friendly interface, complete with an intuitive control panel and a remote control, makes navigation simple and straightforward, allowing users to manage their listening experience effortlessly.

Additional features of the CD-SW200E include a clock and alarm function, making it a practical choice for use in the bedroom or kitchen. This multifunction gadget combines entertainment with practicality, offering a complete audio solution for various lifestyle needs.

Overall, the Sharp CD-SW200E stands out as a powerful, versatile audio system that caters to the needs of a diverse audience. With its range of features, advanced audio technologies, and attractive design, it is an excellent choice for anyone looking to enhance their music listening experience.
Top Page Image Contents