Sharp CD-SW200E For, Placing the speaker system, AC power connection, Demonstration mode

Placing the speaker system

There is no distinction between the right and the left speakers.

Left speaker Main unit Right speaker

Subwoofer
Floor	Table

Note:

The speaker grilles are not removable.

AC power connection

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode.

Wall socket

(AC 230 - 240 V, 50 Hz)

Notes:

The unit will start the tape initialisation when plugged in to the wall socket. During this process, initialising sound will be heard and the unit cannot be turned on. Wait until the process is finished.

Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

Cooling fan:

The main unit is built with a cooling fan at the rear of the unit for improved cooling. Please do not cover the opening of the fan with any obstacles, as this will block proper ventilation.

CD-SW200E

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll and the sub- woofer will light up in flashing mode.

To cancel the demonstration mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS (SURROUND)/
DEMO button. The unit will enter the
low power consumption mode and	Use
the subwoofer light up will be off.
To return to the demonstration mode:	for
When the unit is in the power stand-by mode, press the X-BASS
(SURROUND)/DEMO button again.
	Preparation
Consult your dealer.
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button can
be used to select the extra bass mode.
External FM aerial
Use an external FM aerial if you require better reception.
External FM aerial

75 ohms coaxial cable

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

11

03/12/17 CD-SW200EA 02-12.fm