ST Front Rack
Assembly Instructions
Treker 4200/4400 ST, 4210/4410 ST & 4220/4420 ST Models Manual No.
Before You Start
When you see this symbol, the subsequent
!instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!
IMPORTANT: Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.
Your Land Pride Front Rack is exclusively designed for your ST Treker. Please read these instructions and your vehicle Operator’s Manual thoroughly before beginning. Especially read information relating to safety concerns. Also included in the Operator’s Manual is important information on operation, adjustment, troubleshooting, and maintenance for this attachment (some manual sections do not apply to all accessories).
General Information
These assembly instructions apply to the following ST Front Rack Accessories listed below:
Attaches Front Rack to a Heavy Duty Brush Guard
Tools required:
•Safety glasses
•Work gloves
•Two 1/2" box end or open end wrenches
•Phillips screwdriver
A separate Parts Manual for replacement parts can be purchased from your dealer or available free of charge at www.landpride.com. Have model and serial numbers handy when placing an order.
Manual Part Numbers:
•Operator’s Manual (20 ST Series) . . . . . . .
•Operator’s Manual (00 & 10 ST Series) . . .
•Parts Manual (20 ST Series) . . . . . . . . . . .
•Parts Manual (10 ST Series) . . . . . . . . . . .
•Parts Manual (00 NT/ST Series) . . . . . . . .
Further Assistance
Your dealer wants you to be satisfied with your new Front Rack. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:
1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.
3.For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks.
lpservicedept@landpride.com
Assembly Instructions
A detailed listing of parts for each accessory kit is provided on page 5. Use the list for your particular application as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware.
Initial Preparations
Before servicing the vehicle the following procedure must be met to secure the vehicle:
1.Park vehicle on a level surface. Don’t work under or around a vehicle parked on an incline.
2.Make the following gear and park brake selections:
a.10 & 20 ST Series Trekers:
•Set shift selector in Park.
b.00 ST Series Trekers:
•Set shift selector in forward gear.
•Set park brake.
3.Turn ignition switch off and remove switch key.
4.Chock front and back of a wheel to prevent vehicle from rolling.
5.Go to one of the installation kits listed below to complete installation.
• For installation of Kit No.
• For installation of Kit No.
• For installation of Kit No.
• For installation of Kit No.
© Copyright 2007 | Pr inted | 2/23/07 | 1 |