Shindaiwa PB270, X7502235300 manual Product Description, Specifications

Product Description

Spark Plug

PB270

Gearcase

Grip

Ignition Switch

Handle

Fuel Tank

	Outer Tube	Tank protector
		Throttle
Sweeper Belt		Trigger

Sweeper fins

Sweeper Drum

Using the illustration as a guide, famil- iarize yourself with your machine and its various components. Understand- ing your machine helps ensure top per- formance, long service life and safer operation.

WARNING!

Do not make unauthorized modifications or alterations to any of these units or their components.

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation.

Specifications

Engine Model	S270
Engine Type	2-cycle, vertical-cylinder, air-cooled
Dry Weight (less sweepers)	5.2 kg/11.5 lb.
Dry Weight (Including sweepers)	9.8 kg/21.5 lb.
Bore x Stroke	34 x 30 mm/1.34 x 1.18 in.
Displacement	27.2 cc/1.7 cu. in.
Maximum Power Output	1.5 HP (1.1 kW) @ 7500 min-1
Fuel/Oil Ratio	50:1 with Shindaiwa Premium 2-cycle mixing oil
Fuel Tank Capacity	660 ml/22.3 oz..
Carburetor Type	TK, diaphragm-type
Ignition	One-piece electronic, transistor controlled
Spark Plug	Champion CJ8Y / NGK BPMR7A
Air Cleaner Type	Foam element
Starting Method	Recoil
Stopping Method	Slide switch
Transmission Type	Automatic, centrifugal clutch w/worm gear
EPA Emission Compliance Period*	Category A

*Specifications are subject to change without notice.

*The EPA emission compliance period referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended)

5