Getting started
Parent unit installation
Install the parent unit as shown below.
Make sure that the power outlet is not controlled by a wall switch. Bundle the power adapter cord neatly with a twist tie.
When the battery pack is installed, the light turns on while charging.
Power outlet not controlled by a wall switch
The light remains on when the battery is charging.
Power adapter
Parent unit
• Use only the power adapters supplied with this product. To order a replacement, visit our website at www.babymonitors.vtech.com or call 1 (800)
1 (800)
•The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
•Make sure the units and the power adapter cords are out of reach of children.