AXIS Q7401 Installation Guide | Page 3 |
AXIS Q7401 Video Encoder
Installation Guide
This installation guide provides instructions for installing a AXIS Q7401 Video Encoder on your network. For all other aspects of using the product, please see the product User’s Manual, available on the CD included in this package, or from www.axis.com
Installation steps
Follow these steps to install the AXIS Q7401 Video Encoder on your local network (LAN):
ENGLISH
1.Check the package contents against the list below.
2.Hardware overview. See page page 4.
3.Install the hardware. See page 5.
4.Assign an IP address. See page 6.
5.Set the password. See page 9.
Important!
This product must be used in compliance with local laws and regulations.
Package contents
Item | Models/variants/notes |
|
|
Axis video encoder models | AXIS Q7401 |
|
|
Power adapter models | Type |
|
|
Mounting kit | • 2 screws and plugs to mount the encoder to a concrete wall |
| • 4 Surface protection pads |
| • Terminal block connectors (I/O: |
| connector, Power: |
|
|
CD | AXIS Network Video Product CD, including product documentation, |
| installation tools and other software |
|
|
Printed Materials | AXIS Q7401 Installation Guide (this document) |
| Axis Warranty Document |
|
|