Page 12 | AXIS Q7401 Installation Guide |
Unit connectors
Network connector -
PoE classification switch - Power over Ethernet (IEEE 802.3af), selectable power classification:
•Class 2 - max 6.49W
•Class 3 - max 12.95W (default)
Note: Power classification is performed at power up. If the video encoder does not power the connected analog camera, select PoE Class 2 to inform the PoE switch that the video encoder only needs max 6.49W. PoE Class 3 is the default setting.
Power connector -
• Power input - To supply power to the video encoder with the supplied
power adapter or an external power supply
• Power output - the video encoder can supply power to an analog camera |
|
|
|
| ||||
|
|
|
| |||||
1 | 2 | |||||||
| or auxiliary equipment if powered by PoE, 12V DC max 5W (420mA). | |||||||
|
|
|
|
|
|
|
| |
Function |
| Pin number | Description |
|
|
|
| |
|
|
|
|
|
|
|
| |
GND |
| 1 | Ground |
|
|
|
| |
|
|
|
|
|
|
|
| |
DC Power |
| 2 | Power input |
|
|
|
| |
|
|
| Power output 12V DC, max 5W (420mA). |
|
|
|
| |
|
|
|
|
|
|
|
|
Notes:
•The video encoder can deliver a maximum of 5W (420mA) with PoE. This includes the output on the power connector and the I/O terminal connector.
•Do not connect a power supply if the video encoder is connected to PoE.
Audio in - 3.5mm input for a mono microphone, or a
Audio out - Audio output (line level) that can be connected to a public address (PA) system or an active speaker with a