Axis Communications AXIS Q7401 Set the password, Click the Create self-signed certificate button

AXIS Q7401 Installation Guide Page 9

Set the password

To gain access to the product, the password for the default administrator user root must be set. This is done in the ‘Configure Root Password’ dialog, which is displayed when the AXIS Q7401 is accessed for the first time.

To prevent network eavesdropping when setting the root password, this can be done via an encrypted HTTPS connection, which requires an HTTPS certificate (see note below).

To set the password via a standard HTTP connection, enter it directly in the first dialog shown below.

To set the password via an encrypted HTTPS connection, follow these steps:

1.Click the Create self-signed certificate button.

2.Provide the requested information and click OK. The certificate is created and the password can now be set securely. All traffic to and from the AXIS Q7401 is encrypted from this point on.

3.Enter a password and then re-enter it to confirm the spelling. Click OK. The password has now been configured.

To create an HTTPS connection, start by clicking this button.

To configure the password directly via an unencrypted connection, enter the password here.

4.To log in, enter the user name “root” in the dialog as requested. Note: The default administrator user name root cannot be deleted.

5.Enter the password as set above, and click OK. If the password is lost, the AXIS Q7401 must be reset to the factory default settings. See page 16.

6.If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream in Internet Explorer. You will need administrator rights on the computer to do this.

7.The Live View page of the AXIS Q7401 is displayed, with links to the Setup tools, which allow you to customize the encoder.

ENGLISH