Battery Replacement
For best performance, we recommend replacing the batteries that came with this toy with three, new alkaline “C” (LR14) batteries.
1.5V x 3 “C” (LR14)
Shown Actual Size
Battery
Compartment
Door
•Locate the battery compartment door on the bottom of the keyboard.
•Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery com- partment door.
•Insert three “C” (LR14)alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
•Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not
•When lights or sounds from this toy become faint or stop, it’s time for an adult to replace the batteries!
Battery Tips
•Do not mix old and new batteries.
•Do not mix different types of batteries: alkaline, stan- dard
•Remove the batteries during long periods of
•Do not dispose of batteries in a fire. The batteries may explode or leak.
•Never short circuit the battery terminals.
•
•Only batteries of the same or equivalent type as rec- ommended in the “Battery Replacement” instructions are to be used.
•If removable rechargeable batteries are used, they are only to be charged under adult supervision.
•Rechargeable batteries are to be removed from the toy before they are charged.
•If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired.
FCC Note
(United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Consult the dealer or an experienced radio/TV techni- cian for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3