Stage 1 - Lay & Play Gym
1 | Star Button |
| |
| Leg |
| Support |
Large Slot
•While pressing the star buttons on a support, fit the end of the support into the large slot in one of the legs, as shown. Push the support until it “snaps” into place.
•Repeat this procedure to attach the other support to the remaining leg.
2
Knob
Leg Assembly
Leg Assembly
Stage Switch
•Slide the stage switch to 
for use with babies lying down.
Hint: If your child is not actively playing with this toy, it turns off automatically (sleep mode).
•Be sure to slide the stage switch to the off 
position when not in use.
•Position the keyboard so it faces you.
•Fit a leg assembly to the side of the keyboard, as shown.
•Turn the knob clockwise to secure the leg assembly to the keyboard. Make sure the knob is fully tightened.
•Repeat this procedure to attach the other leg assembly to the keyboard.
|
| Mode Switch | Volume Switch |
3 | • | Slide the mode switch to | for shorter play. When |
Hanger | baby bats the toys, a single song plays with “singing” | ||
|
| ||
| • | Slide the mode switch to | for longer play. When baby bats |
|
| the toys, the music plays for about 10 minutes with “singing” | |
|
|
| |
| • | Locate the volume switch on the bottom of the keyboard. | |
|
| Adjust volume to high | ; or low , for your child’s comfort. |
•Grasp each hanger under the keyboard and pull it down so it swings freely.
•Attach the toys to the hangers as shown.
4