Stage 3 - Stand & Play Piano
1 | To change from Stage 2 to Stage 3 |
• Turn the threaded knobs | |
detach the leg assemblies from the keyboard. |
•Press the star buttons and remove the two supports from the legs. Now proceed to step 2.
If you have not used this toy before and are assembling it for first time use in Stage 3, start with Step 2.
2 | Star Button |
| |
| Leg |
| Support |
Large Slot
•While pressing the star buttons on a support, fit the end of the support into the large slot in one of the legs, as shown. Push the support until it “snaps” into place.
•Repeat this procedure to attach the other support to the remaining leg.
3
Knob
Leg Assembly
Leg Assembly
Stage Switch
•Slide the stage switch to for use with standing toddlers. Hint: If your child is not actively playing with this toy, it turns off automatically (sleep mode).
•Be sure to slide the stage switch to the off position when not in use.
Mode Switch | Volume Switch |
•Position the keyboard so it faces up.
•Fit a leg assembly to the side of the keyboard, as shown.
•Turn the knob clockwise to secure the leg assembly to the keyboard. Make sure the knob is fully tightened.
•Repeat this procedure to attach the other leg assembly to the keyboard.
•Slide the mode switch to . Press the keys to play note by note like a real piano, as stars light up.
•Slide the mode switch to . Press the keys to hear notes that sound like they’re sung by a children’s chorus.
•Locate the volume switch on the bottom of the keyboard. Adjust volume to high ; or low , for your child’s comfort.
4
Tab
Hanger
• | Rotate the hangers up and “snap” them into place. | 6 |
• | Attach the toys to the hangers and tabs as shown. |
|