OPERATION
SHUTDOWN
1.Move the hydraulic system control valve to the OFF position.
2.Disconnect the hydraulic hoses from the tool - first the input (supply) hose, then the output (return) hose.
3.Insert plugs in the hose ends, couplers or tool ports, as applicable.
4.Wipe the tool thoroughly with a clean dry cloth.
5.Clean any foreign matter or joint compound from the die holder surfaces.
COLD WEATHER OPERATION
If the tools is to be used during cold weather, preheat the hydraulic fluid at low engine speed. When using the nor- mally recommended fluids, fluid temperature should be at or above 50 °F/10 °C (400 ssu/82 centistokes) before use.
Damage to the hydraulic system or compression tool can result from use with fluid that is too viscous or too thick.
STORAGE
Replace any damaged or missing safety labels and tags before storing the tool. Clean, dry and lubricate moving parts before storage. Store in a clean, dry place.
CT04 User Manual ◄ 13