Denon AVR-3300 manual Speaker system connections, Connections, Connection the speaker terminals

Page 13

ENGLISH

Speaker system connections

•Connect the speaker terminals with the speakers making sure that like polarities are matched (≈ with ≈ , √ with √ ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired.

•When making connections, take care that none of the individual conductors of the speaker cord come in contact with adjacent terminals, with other speaker cord conductors, or with the rear panel.

NOTE:

NEVER touch the speaker terminals when the power is on. Doing so could result in electric shocks.

Speaker Impedance

•Speakers with an impedance of from 6 to 16 Ω /ohms can be connected for use as front and center speakers.

•Speakers with an impedance of 6 to 16 Ω /ohms can be connected for use as surround speakers.

•Be careful when using two pairs of surround speakers (A + B) at the same time, since use of speakers with an impedance of less than 8 Ω /ohms will

lead to damage.

•The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance are connected.

Connection the speaker terminals

1. Loosen by turning

2. Insert the cord.

3. Tighten by turning

counterclockwise

 

clockwise.

Connecting banana plugs (North America model only)

banana plug

Turn clockwise to tighten, then insert the banana plug.

Connections

• When making connections, also refer to the operating instructions of the other components.

Connection jack for subwoofer with built-in amplifier (super woofer), etc.

FRONT SPEAKER

SYSTEMS

CENTER SPEAKER SYSTEM

SURROUND SPEAKER SYSTEMS

•Precautions when connecting speakers

If a speaker is placed near a

TV or video monitor, the colors on the screen may be disturbed by the speaker’s magnetism. If this should happen, move the speaker away to a position where it does not have this effect.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents AVR-3300 2SAFETY Precautions Francais English Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a monitor TV Connecting the video decksAM loop antenna assembly FM antenna adopter assembly Connecting the antenna terminalsConnecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacksConnecting the Multi Source jacks Connecting the external input EXT. in jacksSpeaker system connections Precautions when connecting speakersConnections Connection the speaker terminalsProtector circuit Front Panel Part Names and Functions+10 Remote control unitSystem Setup button Setting UP the SystemSurround Parameter button Enter buttonSurround speaker selector function Setting the type of speakers Before setting up the systemSystem Setup Menu reappears Setting the bass outputSurround speaker setting screen appears At the System Setup Menu select Bass OutputAt the System Setup Menu select Delay Time Setting the delay timePreparations Select darken the desired units, Meters or Feet Select the desired unit, meters or feetEnter the setting System Setup Menu reappears Setting the channel levelWhen the Manual mode is selected Volume can be adjusted between -12 dB and +12 dB in unitsUse Channel Level screen reappearsSetting the on-screen display OSD Setting the digital inputsSelect the number of EXT. in input channels EXT. in & MultiAuto tuner presets On-screen display signals After completing system setupUsing the remote control unit Remote Control UnitInserting the batteries Operating Denon audio components Set mode switch 2 to the position for the component to beOperated Tuner system buttonsPreset memory VCR Set the slide switch to the component to be registered VDP Operating a video component stored in the preset memoryVCR or TV Operate the video componentLearning function System call function Using the system call functionSystem call buttons Clearing system call settings Storing signalsPress the SET button Before operating OperationFor North American model For multiple voltage modelPlaying the input source Input mode selection functionExample CD Input signal display Input mode displayExample Stereo Listening over headphones Adjusting the sound quality ToneAfter starting playback Turning the sound off temporarily MutingMulti-source recording/playback Playing one source while recording another REC OUT modeChecking the currently playing program source, etc Button Multi source switches directly Display switches as follows each Time the button is pressedUse the Volume buttons to adjust Volume levelMulti-source and multi-zone playback Playback using the external input EXT. in jacksBefore playing with the surround function SurroundFader function Dolby Surround Pro Logic modeSelect the Dolby/DTS Surround mode Set the input mode to Auto or DTSDTS indicator lights when playing DTS sources COMP. Dynamic Range Compression Surround parameters q Cinema EQ. Cinema EqualizerLFE Low Frequency Effect Dialogue NormalizationDSP Surround Simulation Surround modes and their featuresPersonal Memory Plus Set the parameters DSP surround simulationWhen turned counterclockwise When turned clockwisePress the Surround Parameter button Tone control setting Listening to the Radio Setting the frequency step for multiple voltage model onlyManual tuning Auto tuningChecking the preset stations Last Function Memory Recalling preset stationsInitialization of the Microprocessor Troubleshooting Optimum surround sound for different sources Additional InformationBasic setting for primarily watching movies Speaker setting examplesWhen using different surround speakers for movies and music As seen from the sideDolby Surround Dolby Digital Dolby Surround AC-3 Surround2Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDolby Pro Logic DTS Digital SurroundDolby Pro Logic compatible media and playback methods DTS compatible media and playback methodsSurround modes and parameters Specifications
Related manuals
Manual 6 pages 32.63 Kb

AVR-3300 specifications

The Denon AVR-3300 is a powerful audio/video receiver that has garnered a reputation for its rich sound quality, robust features, and impressive performance. Positioned in the mid-range of Denon's esteemed lineup, the AVR-3300 stands out for home theater enthusiasts seeking an exceptional cinematic experience.

At the heart of the AVR-3300 is Denon’s commitment to high-quality audio reproduction. It supports Dolby Digital, DTS, and Pro Logic surround sound formats, providing a multi-dimensional audio experience that envelops the listener. The receiver features a 7.1 channel amplification system, delivering each channel with substantial power and clarity, making it ideal for expansive home theater setups.

One of the key technological advancements incorporated into the AVR-3300 is the implementation of Denon's Advanced AL24 processing. This technology enhances the digital signal, providing higher resolution sound and improved detail retrieval. Alongside this, the receiver is equipped with a 24-bit/192 kHz DAC that ensures sound fidelity across all audio formats, whether streaming from digital sources or playing traditional formats.

The AVR-3300 also features a variety of connection options, accommodating various devices and ensuring versatility. With multiple HDMI inputs, component video connections, and digital audio inputs, users can connect their Blu-ray players, gaming consoles, and streaming devices with ease. Additionally, the receiver includes a dedicated phono input for vinyl enthusiasts, allowing for direct connection to turntables.

An important characteristic of the AVR-3300 is its user-friendly interface and setup process. Denon has included an on-screen graphical user interface that simplifies navigation and adjustment of settings. The receiver also features Audyssey MultEQ technology, which automatically calibrates the sound environment by analyzing the room acoustics and adjusting speaker settings accordingly. This ensures optimal audio performance tailored to the specifics of the user’s space.

In terms of build quality, the Denon AVR-3300 is designed to be both durable and aesthetically pleasing. It sports a sleek front panel with a contemporary design, making it a stylish addition to any home entertainment system.

Overall, the Denon AVR-3300 offers a remarkable combination of sound quality, advanced technology, and user-friendly features. With its robust performance and versatile connectivity options, it remains a highly regarded choice for those looking to enhance their home theater experience.
Top Page Image Contents