Denon AVR-3300 Connecting a DVD player DVD in jacks, Connecting a monitor TV Monitor OUT jack

Page 11

ENGLISH

Connecting a Video Component Equipped with Color Difference (Component - Y, R-Y, B-Y) Video Jacks (DVD Player)

When making connections, also refer to the operating instructions of the other components.

The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.

The AVR-3300’s on-screen display signals are not output from the color difference (component) video output jacks (MONITOR OUT).

Some video sources with component video outputs are labeled Y, Pb, Pr, or Y, Cb, Cr, or Y, R-Y, B-Y. These terms all refer to component video color difference output.

COMPONENT

DVD player

VIDEO OUT

Pr

B

Y

 

Pb

 

Connecting a DVD player

DVD IN jacks

Connect the DVD player’s color difference (component) video output jacks (COMPONENT

VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω /ohms coaxial video pin-plug cords.

In the same way, another video source with component video outputs such as a DTV/DBS tuner, etc., can be connected to the TV/DBS color difference (component) video jacks.

Monitor TV

COMPONENT

VIDEO IN

Pb Pr Y

Connecting a monitor TV

MONITOR OUT jack

Connect the TV’s color difference (component) video input jacks (COMPONENT VIDEO INPUT) to the

COMPONENT MONITOR OUT jack using 75 Ω /ohms coaxial video pin- plug cords.

The color difference input jacks may be indicated differently on some TVs, monitors or video components (“Pr, Pb and Y”, “R-Y, B-Y and Y”, “Cr, Cb and Y”, etc.). For details, carefully read the operating instructions included with the TV or other component.

Y

IN

 

 

COMPONENT VIDEO

 

 

 

 

 

 

 

CB

CR

Y

CB

CR

Y

 

CB

CR

 

 

 

DVD

 

IN

TV/DBS

 

OUT

MONITOR

 

 

 

 

 

 

 

 

 

CENTER

 

 

 

 

 

 

 

 

 

L

 

 

 

 

L

 

 

 

 

 

 

R

 

 

 

 

R

 

 

 

 

 

 

MULTI/

 

SUB

 

 

 

 

 

 

 

 

 

EFFECT

SURROUND WOOFER

FRONT

 

 

 

 

 

 

 

 

 

PRE OUT

 

 

 

 

 

 

 

FRONT

 

CENTER

 

 

 

SURROUND

 

SURROUND

 

R

 

L

 

 

 

R

B

L

R

A

L

 

 

 

 

 

 

SPEAKER SYSTEMS

11

Image 11
Contents AVR-3300 2SAFETY Precautions Francais English Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Connecting the video decks Connecting a video component equipped with S-Video jacksPrecaution when using S-jacks Connecting a monitor TVAM loop antenna assembly FM antenna adopter assembly Connecting the antenna terminalsConnecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacksConnecting the Multi Source jacks Connecting the external input EXT. in jacksConnection the speaker terminals Precautions when connecting speakersSpeaker system connections ConnectionsProtector circuit Front Panel Part Names and Functions+10 Remote control unitEnter button Setting UP the SystemSystem Setup button Surround Parameter buttonSurround speaker selector function Setting the type of speakers Before setting up the systemAt the System Setup Menu select Bass Output Setting the bass outputSystem Setup Menu reappears Surround speaker setting screen appearsPreparations Setting the delay timeAt the System Setup Menu select Delay Time Select darken the desired units, Meters or Feet Select the desired unit, meters or feetEnter the setting System Setup Menu reappears Setting the channel levelChannel Level screen reappears Volume can be adjusted between -12 dB and +12 dB in unitsWhen the Manual mode is selected UseSetting the on-screen display OSD Setting the digital inputsSelect the number of EXT. in input channels EXT. in & MultiAuto tuner presets On-screen display signals After completing system setupInserting the batteries Remote Control UnitUsing the remote control unit Tuner system buttons Set mode switch 2 to the position for the component to beOperating Denon audio components OperatedPreset memory VCR Operate the video component Operating a video component stored in the preset memorySet the slide switch to the component to be registered VDP VCR or TVLearning function System call buttons Using the system call functionSystem call function Press the SET button Storing signalsClearing system call settings For multiple voltage model OperationBefore operating For North American modelExample CD Input mode selection functionPlaying the input source Example Stereo Input mode displayInput signal display Turning the sound off temporarily Muting Adjusting the sound quality ToneListening over headphones After starting playbackChecking the currently playing program source, etc Playing one source while recording another REC OUT modeMulti-source recording/playback Volume level Display switches as follows each Time the button is pressedButton Multi source switches directly Use the Volume buttons to adjustMulti-source and multi-zone playback Playback using the external input EXT. in jacksBefore playing with the surround function SurroundFader function Dolby Surround Pro Logic modeDTS indicator lights when playing DTS sources Set the input mode to Auto or DTSSelect the Dolby/DTS Surround mode Dialogue Normalization Surround parameters q Cinema EQ. Cinema EqualizerCOMP. Dynamic Range Compression LFE Low Frequency EffectPersonal Memory Plus Surround modes and their featuresDSP Surround Simulation Set the parameters DSP surround simulationPress the Surround Parameter button When turned clockwiseWhen turned counterclockwise Tone control setting Listening to the Radio Setting the frequency step for multiple voltage model onlyManual tuning Auto tuningChecking the preset stations Initialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Optimum surround sound for different sources Additional InformationAs seen from the side Speaker setting examplesBasic setting for primarily watching movies When using different surround speakers for movies and musicDolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 2Dolby Digital and Dolby Pro LogicDTS compatible media and playback methods DTS Digital SurroundDolby Pro Logic Dolby Pro Logic compatible media and playback methodsSurround modes and parameters Specifications
Related manuals
Manual 6 pages 32.63 Kb

AVR-3300 specifications

The Denon AVR-3300 is a powerful audio/video receiver that has garnered a reputation for its rich sound quality, robust features, and impressive performance. Positioned in the mid-range of Denon's esteemed lineup, the AVR-3300 stands out for home theater enthusiasts seeking an exceptional cinematic experience.

At the heart of the AVR-3300 is Denon’s commitment to high-quality audio reproduction. It supports Dolby Digital, DTS, and Pro Logic surround sound formats, providing a multi-dimensional audio experience that envelops the listener. The receiver features a 7.1 channel amplification system, delivering each channel with substantial power and clarity, making it ideal for expansive home theater setups.

One of the key technological advancements incorporated into the AVR-3300 is the implementation of Denon's Advanced AL24 processing. This technology enhances the digital signal, providing higher resolution sound and improved detail retrieval. Alongside this, the receiver is equipped with a 24-bit/192 kHz DAC that ensures sound fidelity across all audio formats, whether streaming from digital sources or playing traditional formats.

The AVR-3300 also features a variety of connection options, accommodating various devices and ensuring versatility. With multiple HDMI inputs, component video connections, and digital audio inputs, users can connect their Blu-ray players, gaming consoles, and streaming devices with ease. Additionally, the receiver includes a dedicated phono input for vinyl enthusiasts, allowing for direct connection to turntables.

An important characteristic of the AVR-3300 is its user-friendly interface and setup process. Denon has included an on-screen graphical user interface that simplifies navigation and adjustment of settings. The receiver also features Audyssey MultEQ technology, which automatically calibrates the sound environment by analyzing the room acoustics and adjusting speaker settings accordingly. This ensures optimal audio performance tailored to the specifics of the user’s space.

In terms of build quality, the Denon AVR-3300 is designed to be both durable and aesthetically pleasing. It sports a sleek front panel with a contemporary design, making it a stylish addition to any home entertainment system.

Overall, the Denon AVR-3300 offers a remarkable combination of sound quality, advanced technology, and user-friendly features. With its robust performance and versatile connectivity options, it remains a highly regarded choice for those looking to enhance their home theater experience.