IBM s37l-2095-00 manual Safety Information, General Safety

Page 11

Safety Information

The following section contains the safety information that you need to be familiar with before servicing an IBM mobile computer.

General Safety

Follow these rules to ensure general safety:

Observe good housekeeping in the area of the machines during and after maintenance.

When lifting any heavy object:

1.Ensure you can stand safely without slipping.

2.Distribute the weight of the object equally between your feet.

3.Use a slow lifting force. Never move suddenly or twist when you attempt to lift.

4.Lift by standing or by pushing up with your leg muscles; this action removes the strain from the muscles in your back. Do not attempt to lift any objects that weigh more than 16 kg (35 lb) or objects that you think are too heavy for you.

Do not perform any action that causes hazards to the customer, or that makes the equipment unsafe.

Before you start the machine, ensure that other service representatives and the customer’s personnel are not in a hazardous position.

Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine.

Keep your tool case away from walk areas so that other people will not trip over it.

Do not wear loose clothing that can be trapped in the moving parts of a machine. Ensure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with a nonconductive clip, approximately 8 centimeters (3 inches) from the end.

Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing.

Attention: Metal objects are good electrical conductors.

Wear safety glasses when you are: hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that might be hazardous to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.

Reinstall all covers correctly before returning the machine to the customer.

xii IBM WorkPad z50, Mobile Companion xii

Image 11
Contents March First Edition March About This Manual Contents Vi IBM WorkPad z50, Mobile Companion Before Replacing Parts Important Service InformationFRU Replacement Strategy Safety Notice Safety Notices Multi-lingual TranslationsSafety Notice IBM WorkPad z50, Mobile Companion Safety Notice General Safety Safety InformationElectrical Safety Use caution do not become a victim yourself Switch off power Safety Inspection GuideCheck for worn, frayed, or pinched cables Grounding Requirements Handling Electrostatic Discharge-Sensitive DevicesWorkPad z50 Mobile Companion 2608 Read This First Torque Driver Screw Tightening InformationPlastic to Plastic Logic card to PlasticFollowing is not covered under warranty Page Description FeatureProduct Overview Checkout Guide Symptoms Verified Refer ToAudio Checkout Memory Checkout Keyboard CheckoutModem Checkout Power Systems CheckoutPin Voltage V dc 11.1 Ground Terminal Voltage V dcOptional Dry Cell Battery Checkout If the optional Dry Backup Battery Checkout Nonrechargeable Battery Calibration ApplicationROM Card Checkout External Monitor Self-Test TrackPoint CheckoutCradle Checkout IBM WorkPad z50, Mobile Companion ROM card Installing the ROM/DRAM CardHandling a Screwdriver Removing the ROM/DRAM CardRemoving the Dram ROM Cards Brightness/Contrast Buttons CheckoutSuspend Mode Power Management FeaturesFull Power Mode FRU / Action in Sequence Symptom-to-FRU IndexSymptom / Error LED board Infrared-Related Symptoms Function-Related SymptomsIndicator-Related Symptoms Symptom / Error FRU / Action in Sequence Keyboard- or TrackPoint-Related SymptomsOther Symptoms Peripheral Device Related SymptomsPower-Related Symptoms Undetermined Problems Intermittent ProblemsTool Name Running the DiagnosticsPC Card Slot Test Color Related Service ProceduresStatus Indicators and Control Buttons IndicatorKey Application Launching Key AssignmentsRemoving and Replacing Defective FRUs Safety Notice 1 Translation onSafety Notice 2 Translation on Safety Notice 6 Translation onPage Length Important NoticeScrew Screw Type Head Unplugging and Plugging Flexible Cables Removal reference Backup Batteries Step Size Quantity M2.5 Color Black Torque Kgcm Length 1020 ROM/DRAM CardWorkPad z50 Mobile Companion Battery Pack Keyboard Assembly Bottom Cover WorkPad z50 Mobile Companion Step Size Quantity M2.0 Color Torque Kgcm Length MainboardLCD Bezel LCD Unit Inverter Card and LCD Panel Step Size Quantity Color M2.5 Hex Torque Kgcm Length FPC AssemblyMicrophone SpeakerAudio Ports PC Card Slot AssemblyWorkPad z50 Mobile Companion 1160 RJ-11 Assembly Hardware Button Board Top Cover Locations Front Right View Right View Left ViewBottom View Rear ViewSystem Unit Parts Listing System Unit FRU List LCD Unit Parts List CRU For 3-pin power cords Power CordIBM TrademarksIBM