SAFETY INSTRUCTIONS

Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

 

 

 

 

Warning, Caution

Prohibitive Action

Mandatory Action

 

 

 

WARNING

Have a qualified serviceman do the installation.

Only qualified personnel should work inside the equipment.

Turn off the power at the switchboard before installing the equipment.

Fire or electrical shock can result if the power on.

Do not install the unit in a place subject to rain or water splash.

Fire or electrical shock can result.

Use the specified power cable.

Fire can result if an incorrect cable is used.

CAUTION

Attach protective earth securely to the ship’s body.

The protective earth (grounding) is required for the AC power supply to prevent electri- cal shock.

Do not weld the tank with transducer to the ship’s hull.

CAUTION

Confirm that the power supply voltage is compatible with the voltage rating of the equipment.

Connection to the wrong power supply can cause fire or damage to the equipment.

The mounting location for the display, distributor and transceiver unit must satisfy the following conditions:

-Away from rain and water splash -Out of direct sunlight

-Away from air conditioner vents

-Moderate and stable in temperature and humidity

Use Chugoku Toso brand Marine Star 20 anti-fouling paint or the equivalent for the transducer.

Coat thinly and evenly. A thick coat can reduce output power.

Observe the compass safe distances to prevent interference to a magnetic compass.

 

Standard

Steering

DS-600

0.60 m

0.40 m

DS-605

0.95 m

0.60 m

DS-610

3.15 m

2.00 m

DS-620

3.20 m

2.05 m

DS-640

1.15 m

0.70 m

DS-340

1.05 m

0.65 m

i

Page 3
Image 3
Furuno DS-60 installation manual Safety Instructions