1. INSTALLATION

5)Attach the metal fixing (supplied) to the connector, and use two bolts M6x20 and spring washers M6 to fix them.

Hex. bolt (M6x20)

Spring washer (M6)

Cable assy.

Metal fixing

11.Pass the fixing gland (6), washer (7) and gasket (8) through the transducer cable (DS-631: cable assy), and slide them to the white line on the cable.

12.Pass the cable through the hole at the top of the tank (2).

Transducer cable

Tank (2)

Gasket (8)

Washer (7)

(The hollow side must be upward.)

Fixing gland (6)

White line

(printed on the cable)

1-9

Page 15
Image 15
Furuno DS-60 installation manual Hex. bolt M6x20 Spring washer M6 Cable assy Metal fixing