Furuno DS-60 installation manual Mounting considerations, Mounting procedure

1. INSTALLATION

1.6Installation of Display Unit with DS-605 (Water Proof Box, option)

For installation of the display unit on the wings of the bridge, use the optional water proof box DS- 605. Fix the DS-605 on the bulkhead and set the display unit therein.

Installation materials for DS-605 (Type: CP66-01731, Code No.: 001-082-660-00)

Name	Type	Code No.	Qty	Remarks
Seal Washer	03-001-3002-0 RoHS	300-130-020-10	4
Gasket (2)	26-003-1605	100-355-310-10	1	For DS-60
Washer (2)	26-003-1607	100-355-320-10	2
Cable Gland Washer	JIS F8801 25C	000-172-238-10	2	For RD-50
Cable Grand Inner gasket	JIS F8801 25C	000-171-892-10	1
Silicon Rubber	S-8400W 50G	000-158-483-10	1

Mounting considerations

The DS-605 has waterproofing protection of IP56. When you select a mounting location for the waterproof box, keep in mind the following points.

•Keep the unit away from electromagnetic field-generating equipment like motors and genera- tors.

•For maintenance and checking purposes, leave enough space at the sides of the unit and leave slack in cables. See the outline drawing at the back of this manual.

•A magnetic compass will be affected if the waterproof box is too close to the magnetic com- pass. Observe the compass safe distances (see page i) to prevent interference to a magnetic compass.

Mounting procedure

Note: Mount the DS-605 on the bulkhead so the cable glands and the drain hole are down.

1.Fix the DS-605 on the wings of the bridge.

1)Insert the seal washer to four fixing holes.

2)Fix the DS-605 with four M10 bolts (dockyard supply).

176 ± 0.5 62 (2.44”) (6.93”)

340 (13.39”)

310 ± 0.5 (12.20”)

Fixing hole 4-ø12

Note: Mount the unit so the cable glands are down.

Cable gland

1-17