3. MENU SETTINGS
2.Select an item, and press the [ENT] key to show the setting window. Refer to the table in below to enter the dimensions.
Item | Meaning | Setting range |
|
|
|
LOA | Ship’s length | 50.0 to 400.0 m |
|
|
|
B | Ship’s width | 5.0 to 100.0 m |
|
|
|
L1 | Horizontal distance from the ship’s bow to transducer | 0.0 m to the setting value for “LOA” |
|
|
|
L2 | Horizontal distance from port to transducer | 0.0 m to the setting value for “B” |
|
|
|
L3 | Horizontal distance from sip’s bow to GPS antenna | 0.0 m to the setting value for “LOA” |
|
|
|
L4 | Horizontal distance from port to GPS antenna | 0.0 m to setting value for “B” |
|
|
|
L5 | Horizontal distance from ship’s bow and CCRP (bridge) | 0.0 m to setting value for “LOA” |
|
|
|
D | Horizontal distance between transducers for | 0.0 m to |
| echo sounder. |
|
|
|
|
3. Press the [MENU/ESC] key to close the menu.
3.2.3How to enter offset values
1. Press S to select [Offset Data], and [ENT] key to show the Offset Data menu.
2. Select [Trim], and press the [ENT] key.
3.Enter the offset value for inclined angle, and press the [ENT] key (setting range:
+12.5°, +: rise at bow).
4.Press T to select [Heel], and press the [ENT] key.
5.Enter the offset value for the heel, and press the [ENT] key (setting range:
6.Press T to select [XDCR], and press the [ENT] key.
