1. INSTALLATION

13.Use the tightening handle (option) to fasten the fixing gland (6) from the inside of the tank (2). The distance between the bottom of the fixing gland (6) and tank must be less than 15 mm.

Transducer cable

Tank

Fixing gland

less than 15 mm

Transducer tank, sectional view

14.Rotate the fixing flange (4) twice horizontally to make two loops. These loops make it easy to put the cable in the tank.

15.Use the bolt M10x25 (9) and spring washer M10 (10) to fasten the fixing flange (4) to the tank

(2).

Rotate the fixing flange (4) twice horizontally

to make two loops on the cable.

M10 spring washer (10)

M10x25 hex. bolt (9)

1-10

Page 16
Image 16
Furuno DS-60 installation manual Transducer tank, sectional view