I cannot see the | Have you locked |
On Screen | the On Screen |
Display. | Display (OSD) |
| Menu to prevent |
| changes? |
The screen shows | Is the screen |
strange colors or | displaying only one |
just black and | color as if looking at |
white. | the screen through |
| a cellophane |
| paper? |
monitor and restore the image on the screen.
Unlock the OSD by pressing the [ ] button for at least 5 seconds.
Check the signal cable connection.
Make sure the video card is fully inserted in its slot.
| Have the screen | Reboot the computer. |
| colors become |
|
| strange after |
|
| running a program |
|
| or due to a crash |
|
| between |
|
| applications? |
|
| Has the video card | Set the video card by referring to the video card manual. |
| been set properly? |
|
The screen | Have you changed | Adjust screen image position and size using the OSD. |
suddenly has | the video card or |
|
become | the driver? |
|
unbalanced. |
|
|
| Have you adjusted | Adjust the resolution and frequency at the video card. |
| the resolution or | (Refer to thePreset Timing Modes). |
| frequency to the |
|
| monitor? |
|
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is out | Have you adjusted |
of focus or OSD | the resolution or |
cannot be | frequency on the |
adjusted. | monitor? |
LED is blinking but | Is the frequency |
no images on the | properly adjusted |
screen. | when checking the |
| Display Timing on |
| the menu? |
There are only 16 | Have the Windows |
colors shown on | colors been set |
the screen. The | properly? |
screen colors have |
|
changed after |
|
changing the video |
|
card. |
|
| Has the video card |
| been set properly? |
Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes).
Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.
(The maximum frequency per resolution may differ from product to product.)
Windows XP :
Set the resolution at the Control Panel → Appearance and Themes → Display → Settings.
Windows ME/2000 :
Set the resolution at the Control Panel → Display → Settings.
Set the video card by referring to the video card manual.
There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".
Check when MagicTune™ does not function
Have you installed the monitor driver?
See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.
MagicTune™ feature is found only on PC (VGA) with
Install the monitor driver according to the Driver Installation Instructions.
Install the monitor driver according to the Driver Installation Instructions.
*To check whether your PC is available for MagicTune™ feature, follow the steps below (When Windows is XP);