Section 10 - Installing the Car Seat without the Base | 35 |
Decide where in the vehicle to install the car seat.
Check that the carseat will sit firmly in that position.
To position the car seat at the correct angle adjust it until the line on the side labels is level.
If it is not possible to get the carseat sitting firmly and level move it to another position in the vehicle or do not install in that vehicle.
Some models have a rebound bar for additional stability in the vehicle. Carseats having this bar must still be positioned as shown by the line on the label.
WARNING: Not all vehicle belts are suitable for a car seat installation. See Section 11 for more information on suitable vehicle belts.
Section 10 - Installing the Car Seat without the Base | 36 |
ADDITIONAL SUPPORT FOR THE CAR
SEAT
Some vehicle seats do not provide enough support to hold the car seat up at the required angle.
If extra support is required a tightly rolled towel or firm foam roll (pool noodle) can be used.
Any extra support used to hold the car seat up must not interfere with the Vehicle Belts.