Combi Centre EX 8086, Centre ST 8065, Centre DX 8074 Installing the Car Seat Base with Latch

Page 14

Section 8 - Installing the Car Seat Base with LATCH

25

Section 8 - Installing the Car Seat Base with LATCH

26

LATCH strap stored in base foot

The LATCH strap is stored in the base foot. To remove the LATCH strap, swing the base foot open by adjusting it to the maximum downwards position and then pressing the release catch.

Remove the LATCH strap from its storage position.

WARNING:LATCH connectors must be

secured to the vehicle LATCH anchorages only.

Pull

Press down

LATCH

firmly on base

strap

 

tight

 

 

 

If the LATCH strap is too short, rotate the LATCH strap adjuster upwards to loosen the LATCH strap.

Route the LATCH strap under the Vehicle Belt Routing Tabs and over the top of the base as shown.

Connect the LATCH strap connectors to the vehicle anchorages.

Excess vehicle belt can be passed back under the routing lugs and through the built-in Locking Clip.

See page 31 for information on using the built-in Locking Clip.

Press down on the base and pull the LATCH strap as tight as possible.

WARNING: Never attach more than one anchor to a vehicle lower anchorage unless recommended by the vehicle Owners Manual.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CentreTM Infant Car Seat Contents Page Need HELP? Proper Use Check ListAssistance Car Seat Parts Optional Rebound Bar not all modelsBase Parts Securing Infant in Car Seat OverviewCorrect Positioning Shoulder Straps Height is Non-Adjustable Headrest ModelsAdjustable Headrest Models Important You should hear a click as Infants with Special Needs Installing the Car Seat Where is the Safest Place to Install this CAR SEAT?Installing the Car Seat Installing the Car Seat Installing the Car Seat Base General Vehicle BeltsInstalling the Car Seat Base with Latch Fitting the CAR Seat Into the Base Pull the belt tight Installing the Car Seat Base with Vehicle BeltsLAP only Belt LAP/SHOULDER BeltBUILT-IN Locking Clip Connect the car seat to the base Installing the Car Seat without the Base Additional Support for the CAR SeatKeep the belts tight Pull the belts tightLocking Clip Vehicle Belt Systems Belts Forward of Seat BightVehicle Belt Systems Lap Belt with Motorized Shoulder Belt Combination Lap/Shoulder Belt with Free Sliding Latch PlatePassive Restraints Combination Lap/Shoulder Belt with Locking Latch PlateInfant Iinsert AccessoriesCanopy To ConnectStroller or Travel System and Airplane use Feeder Position Other UsesRocker Position Care and Cleaning Additional InformationReplacement Parts Registration Information

Centre DX 8074, Centre ST 8065, Centre EX 8086 specifications

The Combi Centre series, comprising the EX 8086, ST 8065, and DX 8074 models, represents a significant advancement in modern engineering, combining versatility and innovation for a range of applications. Each model brings unique features and technologies tailored to meet various user needs while maintaining a cohesive design philosophy.

Starting with the Combi Centre EX 8086, this model is renowned for its exceptional performance in both industrial and commercial settings. It features a robust construction that ensures long-lasting durability under heavy usage. One of the main highlights of the EX 8086 is its advanced control system, which integrates real-time monitoring capabilities, allowing users to track operational parameters accurately. Additionally, this model boasts energy-efficient motors, resulting in reduced operational costs while minimizing environmental impact. The EX 8086 is also equipped with an ergonomic interface, enhancing user experience through intuitive controls and easy navigation.

Next in line is the Centre ST 8065, which is specifically designed for versatility and efficiency. This model features modular components that can be easily customized, enabling users to tailor the machine to specific tasks. The ST 8065 employs cutting-edge automation technology, streamlining workflows and maximizing productivity. Another standout characteristic of this model is its enhanced safety features, including emergency stop functions and improved shielding, ensuring a secure working environment. The ST 8065 is particularly praised for its low maintenance design, contributing to decreased downtime and operational efficiency.

Finally, the Centre DX 8074 distinguishes itself with advanced connectivity options, enabling seamless integration with other systems and devices. It features IoT capabilities, allowing users to monitor performance remotely and receive real-time alerts for maintenance needs. The DX 8074 also integrates sophisticated data analytics tools, providing insights that help in optimizing performance and enhancing decision-making processes. Its sleek design is paired with rugged components, making it suitable for both harsh environments and delicate tasks, highlighting its versatility.

In summary, the Combi Centre EX 8086, ST 8065, and DX 8074 models exemplify innovation in engineering and design. Each model features unique technologies and characteristics that cater to specific needs, while their collective emphasis on efficiency, safety, and durability makes them ideal choices for a wide range of industrial and commercial applications. Together, they represent a powerful lineup that continues to push the boundaries of what is possible in their respective fields.
Top Page Image Contents