Securing Infant Car Seat Without Base | Combi 8000 Series instruction

Shoulder (fig. e) Belt

Shoulder

Belt Guide

Securing Infant Car Seat Without Base:

WARNING DEATH or SERIOUS INJURY can occur

•Not all vehicle seat belts can be used with a car seat. Read vehicle owner’s manual and “Vehicle Seat Belts” section in this manual.

1Refer to vehicle owner’s manual to identify the seating location which can be used with a car seat. Check for specific instructions for car seat use.

2After selecting a seating location, adjust vehicle seat back into most upright position.

3Place car seat rear-facing on vehicle seat.

4Carry handle can be moved to the vehicle use position (see “Carry Handle Operation” section).

5Thread vehicle lap belt through vehicle lap belt guides on car seat (fig. a) and buckle vehicle belt. Be sure vehicle lap belt is not twisted. Do not place shoulder belt through vehicle lap belt guides.

6Press down firmly on car seat to compress vehicle seat cushion while tightening vehicle lap belt (fig. b).

7Adjust recline using the recline indicator on the side of car seat (fig. a). Line on recline indicator must be in green striped zone.

If line is not in green striped zone, place a tightly rolled up towel, blanket or firm foam (pool noodle) under end of car seat contacting vehicle seat back.

If base can not be adjusted to locate the line in the green striped zone:

1.Try a different seating position.

2.Do not use this infant car seat.

Vehicle Lap

Belt Guides

Towel or

Pool Noodle

(fig. a)

Level

Indicator

NOTE: Vehicle must be parked on horizontal surface during this installation.

8Check for secure installation. Pull front to back and left to right to check for secure installation (fig. c). Vehicle lap belt MUST stay tight.

If vehicle lap belt does not stay tight, see “Installation with Lap/Shoulder Belts” below.

9Recheck car seat recline. Verify line is in green striped zone of recline indicator.

Installation with Lap/Shoulder Belts:

•When using vehicle lap/shoulder belts, shoulder belt may be used for additional support. Place shoulder belt around back of Tyro™ (fig. d) and through the vehicle shoulder belt guide on back of car seat shell (fig. e). If shoulder belt is too short to go around back of Tyro™, position shoulder belt through the lap belt guide above the vehicle buckle and against vehicle seat back (fig. f). Do not route shoulder belt through lap belt guides on

both sides of car seat.

• Lap/shoulder belt with free sliding latch plate:

-Pull out on latch plate (fig. g). If belt slides freely through latch plate, a belt lock-off must be used as described in “Belt Lock-off” section.

-Some combination lap/shoulder belts with free sliding latch plates

may be converted into an “automatic locking mode” that will allow use without a belt lock-off. See vehicle owner’s manual and label on vehicle belts for instructions.

Removal Of Infant Car Seat From Vehicle:

1 Unhook shoulder belt from behind car seat and unbuckle vehicle seat belt.

2Remove lap belt from vehicle lap belt guides.

3 Push in handle buttons on each side of handle and rotate to upright carry use position (see “Carry Handle Operation” section).

4Remove car seat from vehicle.

(fig. b)

(fig. c)

(fig. d)

Latch

Plate

(fig. f)

(fig. g)

8000 Series specifications

The Combi 8000 Series represents a significant advancement in the world of modern equipment solutions, combining efficiency with cutting-edge technology. This series is designed to cater to the diverse needs of industries ranging from manufacturing to distribution, providing versatility and reliability.

One of the standout features of the Combi 8000 Series is its robust construction. Designed for heavy-duty applications, these machines are built to withstand rigorous use while maintaining high performance. The chassis is manufactured from high-grade materials, ensuring both durability and longevity in demanding environments.

A key characteristic of the Combi 8000 Series is its innovative automation technology. These machines are equipped with advanced control systems that simplify operation and increase productivity. The user-friendly interface allows operators to easily navigate through various settings, making adjustments on the fly and enabling quick responses to changes in operational demands.

The Combi 8000 Series also excels in energy efficiency. By utilizing state-of-the-art energy management systems, these machines reduce power consumption without compromising performance. This not only leads to cost savings for businesses but also contributes to a more sustainable operation, aligning with corporate goals for environmental stewardship.

Another notable technology featured in the Combi 8000 Series is its integrated diagnostics system. This feature continuously monitors the machine's performance, providing real-time feedback and alerts for maintenance needs. This proactive approach to machine care minimizes downtime and enhances overall efficiency by allowing for timely interventions.

In terms of versatility, the Combi 8000 Series offers a range of customizable options to meet specific operational requirements. From different configuration setups to various attachment capabilities, businesses can tailor these machines to effectively tackle their unique challenges.

Safety is paramount in the design of the Combi 8000 Series. Equipped with comprehensive safety features, including emergency stop buttons and safety guards, these machines are built to protect operators and reduce risk in the workplace.

In conclusion, the Combi 8000 Series is a groundbreaking fusion of strength, efficiency, and advanced technology. Its formidable construction, automation capabilities, energy-saving features, and focus on safety make it an ideal choice for businesses looking to enhance their operational efficiency and productivity. As industries continue to evolve, the Combi 8000 Series stands ready to meet the challenges of tomorrow.