Combi 8000 Series instruction manual Securing Infant In Car Seat

Page 5
Chest Clip
(fig. d)
7
Pull
(fig. c)
Rolled Towel
Harness Adjuster Strap
6
(fig. b)
Click
5
(fig. a)
- A snug harness strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.
Pull harness adjuster strap (fig. c) to snugly adjust harness straps.
- Check that harness straps are snug on shoulder and thighs. Straps should not allow a finger to pass between the belt and the child’s shoulder.
Pull up on tongues to be sure they are locked.
Place top of buckle tongues together and insert buckle tongues into buckle (fig. b). You should hear a click.
Place harness straps over child’s shoulders and thighs.
Loosen harness - while pressing on harness adjustment lever, pull harness straps out.
2
3
3 Place infant in car seat with back and rump contacting seating surfaces (fig. a).
4
- Shoulder harness straps must be through shoulder harness slots at or just below infant’s shoulders. - Infant insert MUST be used for small infants.
See “Operations and Adjustments” section to change position of harness.

7

Section 6 - Securing Infant In Car Seat

WARNING DEATH or SERIOUS INJURY can occur

•Keep harness straps snug and positioned on shoulders and thighs. Infant MUST be secured by harness system at all times, when infant seat is used in vehicle or outside of vehicle.

•For proper harness fit, infant insert MUST be used with small infants.

•Harness safety cover MUST be present and snapped onto metal rod to allow proper harness adjustment.

•Discontinue the use of the infant insert when:

-Child’s shoulders are above middle belt slots in seat back of car seat.

-Shoulder belts become too short to fit infant (approximately 5 months of age).

•Child must be dressed in clothing with arms and legs that will not interfere with buckling, snugly adjusting or positioning harness.

•DO NOT use accessories or parts other than those provided by COMBI International Corporation. Use of accessories or parts from other manufacturers could alter the performance of the car seat.

•Never leave child unattended, even when sleeping.

•Suffocation Hazard: Infant car seat can roll over on soft surfaces and suffocate child. Never place infant car seat on beds, sofas or other soft surfaces.

•Strangulation Hazard: Child can strangle in loose harness straps. Never leave child in an infant car seat when straps are loose or undone.

•Fall Hazard: Child’s movement can slide infant car seat. Never place infant car seat near edges of countertops, tables or other elevated surfaces.

1Position harness to fit infant:

NOTE: If harness can not be snugly adjusted as described above, do not use this infant car seat.

Close chest clip and position chest clip at arm pit level (fig. d).

Small infants:

For a small infant, a rolled towel can be used on each side for support (fig. d).

Towels MUST not interfere with the ability to snugly adjust the harness system.

DO NOT place towel or other items behind infant or between infant and harness.

8

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MBI Table of Contents Proper Use Is Required Proper Use Check ListTyro Infant Car Seat Parts Height and Weight LimitsUse Recommendations Infants With Special NeedsSecuring Infant In Car Seat Options For Securing a Car Seat Selecting a Vehicle Seating LocationLatch System Installation of Infant Car Seat in VehicleLatch System On This Car Seat Latch System On VehiclesSecuring Base With Latch System Attaching Infant Car Seat To BaseStorage Of Lower Anchorage Belt And Lower Anchor Connectors Removal Of Base Installed With LatchFig. a Vehicle Buckle Securing Base With Vehicle Seat BeltRemoval Of Infant Car Seat From Vehicle Installation with Lap/Shoulder BeltsSecuring Infant Car Seat Without Base Changing Harness Use Position Operation and AdjustmentStroller or Travel System Use Base Adjustment Harness Use and AdjustmentInfant Insert CanopyVehicle Seat Belt Systems Lap Belts Manually AdjustableBelts Forward of Seat Bight FlipInch to 1 inch 1.3 to 2.5 cm Lap Belts With RetractorLap or Shoulder Belt Mounted on Front Door fig. f Additional Information Registration Information Care and CleaningFig. aLeg Securing Base With Lap and Shoulder Belt

8000 Series specifications

The Combi 8000 Series represents a significant advancement in the world of modern equipment solutions, combining efficiency with cutting-edge technology. This series is designed to cater to the diverse needs of industries ranging from manufacturing to distribution, providing versatility and reliability.

One of the standout features of the Combi 8000 Series is its robust construction. Designed for heavy-duty applications, these machines are built to withstand rigorous use while maintaining high performance. The chassis is manufactured from high-grade materials, ensuring both durability and longevity in demanding environments.

A key characteristic of the Combi 8000 Series is its innovative automation technology. These machines are equipped with advanced control systems that simplify operation and increase productivity. The user-friendly interface allows operators to easily navigate through various settings, making adjustments on the fly and enabling quick responses to changes in operational demands.

The Combi 8000 Series also excels in energy efficiency. By utilizing state-of-the-art energy management systems, these machines reduce power consumption without compromising performance. This not only leads to cost savings for businesses but also contributes to a more sustainable operation, aligning with corporate goals for environmental stewardship.

Another notable technology featured in the Combi 8000 Series is its integrated diagnostics system. This feature continuously monitors the machine's performance, providing real-time feedback and alerts for maintenance needs. This proactive approach to machine care minimizes downtime and enhances overall efficiency by allowing for timely interventions.

In terms of versatility, the Combi 8000 Series offers a range of customizable options to meet specific operational requirements. From different configuration setups to various attachment capabilities, businesses can tailor these machines to effectively tackle their unique challenges.

Safety is paramount in the design of the Combi 8000 Series. Equipped with comprehensive safety features, including emergency stop buttons and safety guards, these machines are built to protect operators and reduce risk in the workplace.

In conclusion, the Combi 8000 Series is a groundbreaking fusion of strength, efficiency, and advanced technology. Its formidable construction, automation capabilities, energy-saving features, and focus on safety make it an ideal choice for businesses looking to enhance their operational efficiency and productivity. As industries continue to evolve, the Combi 8000 Series stands ready to meet the challenges of tomorrow.
Top Page Image Contents