Combi 8000 Series Attaching Infant Car Seat To Base, Securing Base With Latch System

Page 8
LATCH
Compartment

13

Attaching Infant Car Seat To Base:

1Verify that there are no objects on top of base or between base and infant car seat.

2Lower car seat into base and push down on car seat to lock car seat into base (fig. b).

3Test to be sure car seat is locked in base. Lift infant car seat at top of seat back (fig. c) and at front end.

4

Carry handle can be moved to the vehicle use position (see “Carry Handle

 

Recline

 

Operation” section).

Indicator

5

Adjust recline using recline indicator on the side of car seat. Line on

 

 

 

recline indicator MUST be in green striped zone (fig. d).

 

Green (fig. b) Striped

Zone

If line is not in green striped zone, adjust base (see “Base Adjustment” section), and recheck recline of car seat. Repeat until recline indicator is in green striped zone.

If base can not be adjusted to locate the line in the green striped zone:

1.Try a different seating position.

2.Do not use this infant car seat.

NOTE: Vehicle must be parked on horizontal surface during this installation.

(fig. d)

Securing Base With LATCH System:

(fig. c)

WARNING DEATH or SERIOUS INJURY can occur

 

•Only use the car seat LATCH System in vehicle seating locations recommended by the vehicle manufacturer for use with LATCH and have an anchor spacing of 280 mm (11 inches).

•LATCH connectors must be secured to the vehicle LATCH anchorages only. Connection to other vehicle components could result in the anchor tearing free in a crash.

•Never attach more than one anchor connector to a vehicle lower anchorage unless recommended by the vehicle owner’s manual for that vehicle.

1 Refer to vehicle owner’s manual to identify the seating locations with LATCH

LATCH

System. Select the seating location to be used and locate the vehicle lower

Lower Anchor

anchorages at the seat bight.

Belt

 

A LATCH Anchorage System with 280 mm (11 inches) spacing may not be available in your vehicle in the rear center seating position. If use of the rear center position is preferred, use the vehicle seat belt to secure the car seat. See “Securing Base

With Vehicle Seat Belt” section.

(fig. a)

2Remove car seat from base.

3 Remove the LATCH lower anchor belt with lower anchor connectors from the LATCH

Pull

compartment in base (fig. a).

 

4Lengthen lower anchor belt. While pressing down on release button on top of belt adjuster, pull belt to extend the length of lower anchor belt (fig. b).

Adjuster

Slide Button

Lower

Anchor Belt

5Position the lower anchor belt with the belt adjuster slide buttons facing away from the car seat. If the adjuster is not in that position, turn the belt and adjuster over.

6Place the lower anchor belt under both belt path tabs in the base (fig. c). Belt Lock-off will be under LATCH belt. Check that the belt is not twisted.

7

Adjust vehicle seat back into most upright position.

Adjuster

 

 

Belt

8

Place base rear-facing in the vehicle seat location

 

 

 

 

selected with LATCH belt toward vehicle seat back

 

 

and centered between the vehicle lower anchors

 

 

(fig. d).

 

(fig. b)

(fig. c)

14

(fig.d)

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents MBI Table of Contents Proper Use Check List Proper Use Is RequiredHeight and Weight Limits Tyro Infant Car Seat PartsUse Recommendations Infants With Special NeedsSecuring Infant In Car Seat Selecting a Vehicle Seating Location Options For Securing a Car SeatInstallation of Infant Car Seat in Vehicle Latch SystemLatch System On This Car Seat Latch System On VehiclesAttaching Infant Car Seat To Base Securing Base With Latch SystemRemoval Of Base Installed With Latch Storage Of Lower Anchorage Belt And Lower Anchor ConnectorsSecuring Base With Vehicle Seat Belt Fig. a Vehicle BuckleRemoval Of Infant Car Seat From Vehicle Installation with Lap/Shoulder BeltsSecuring Infant Car Seat Without Base Changing Harness Use Position Operation and AdjustmentStroller or Travel System Use Harness Use and Adjustment Base AdjustmentInfant Insert CanopyLap Belts Manually Adjustable Vehicle Seat Belt SystemsBelts Forward of Seat Bight FlipInch to 1 inch 1.3 to 2.5 cm Lap Belts With RetractorLap or Shoulder Belt Mounted on Front Door fig. f Additional Information Care and Cleaning Registration InformationSecuring Base With Lap and Shoulder Belt Fig. aLeg

8000 Series specifications

The Combi 8000 Series represents a significant advancement in the world of modern equipment solutions, combining efficiency with cutting-edge technology. This series is designed to cater to the diverse needs of industries ranging from manufacturing to distribution, providing versatility and reliability.

One of the standout features of the Combi 8000 Series is its robust construction. Designed for heavy-duty applications, these machines are built to withstand rigorous use while maintaining high performance. The chassis is manufactured from high-grade materials, ensuring both durability and longevity in demanding environments.

A key characteristic of the Combi 8000 Series is its innovative automation technology. These machines are equipped with advanced control systems that simplify operation and increase productivity. The user-friendly interface allows operators to easily navigate through various settings, making adjustments on the fly and enabling quick responses to changes in operational demands.

The Combi 8000 Series also excels in energy efficiency. By utilizing state-of-the-art energy management systems, these machines reduce power consumption without compromising performance. This not only leads to cost savings for businesses but also contributes to a more sustainable operation, aligning with corporate goals for environmental stewardship.

Another notable technology featured in the Combi 8000 Series is its integrated diagnostics system. This feature continuously monitors the machine's performance, providing real-time feedback and alerts for maintenance needs. This proactive approach to machine care minimizes downtime and enhances overall efficiency by allowing for timely interventions.

In terms of versatility, the Combi 8000 Series offers a range of customizable options to meet specific operational requirements. From different configuration setups to various attachment capabilities, businesses can tailor these machines to effectively tackle their unique challenges.

Safety is paramount in the design of the Combi 8000 Series. Equipped with comprehensive safety features, including emergency stop buttons and safety guards, these machines are built to protect operators and reduce risk in the workplace.

In conclusion, the Combi 8000 Series is a groundbreaking fusion of strength, efficiency, and advanced technology. Its formidable construction, automation capabilities, energy-saving features, and focus on safety make it an ideal choice for businesses looking to enhance their operational efficiency and productivity. As industries continue to evolve, the Combi 8000 Series stands ready to meet the challenges of tomorrow.
Top Page Image Contents