Section 7 - Installation and Use
7.3 Rear Facing Installation with Seat Belt .
Route seat belt through the rear facing safety belt path.
Press down on seat with hand to compress the automobile seat cushion.
With weight still in seat, insert the seat buckle tongue into the buckle and pull seat belt tight as possible. Pull up on buckle tongue to ensure the buckle is secure.
11Press yellow arm into place and hold.
| |
| |
|
12 Rotate red lock to the locked |
|
|
position. You will feel the red lock, | | |
snap into position.Repeat other side. |
| |
| 12 | |
13 Ensure the angle indicator line |
| |
|
| |
is level with the ground to keep |
|
|
| the child’s airway open. |
| 11 |
14 Check for movement of the |
| ||
|
| ||
| restraint at the safety belt path. |
|
|
| The restraint should not move |
| |
|
|
| 15 |
| more than 1 inch in any direction. | | |
|
| ||
| If the restraint moves more than 1 |
| |
|
|
| |
| inch, repeat all steps until all safety |
|
|
| steps are met. |
|
|
15 | Fold pad down and fasten all |
| 13 |
| snaps. |
| |
|
|
|