Section 7 - Installation and Use
7.4Rear Facing Installation with Lower Anchor
NEVER use a Top Tether connector in a rear facing installation!!
Lower Anchor
The True Fit, in a Rear Facing installation, was designed with a removable upper seatback to allow for a proper installation when the upper seatback comes in contact with the front seat. If the upper seatback comes in contact with the front seat and prevents a 45 degree installation, remove the upper seatback and install the True Fit at 45 degrees per the instructions in this section. To remove the upper seatback refer to section 7.17 and read all WARNINGS. Reinstall the upper seat back when child reaches 22 lbs. Keep child in a rear facing position as long as possible
If you have any question regarding the use of the upper seat back or any other questions please contact the First Years staff at