Mobility Electronics manual Setting up the PS6S1800M, Power Connection

invision Serial/Modem Charging Cradle User Guide

Setting up the PS6S1800M

Setting up your PS6S1800M is easy and includes only these simple steps.

1.Power Connection

2.HotSync Connection:

a.Connect the serial cable to the computer (if you want to HotSync with the computer), or

b.Connect the modem (if you want to HotSync with a remote location via the modem)

Power Connection

To connect your PS6S1800M to your computer:

Connect your Symbol’s power adapter into a US

standard 110V wall outlet.

Connect the barrel end of the power adapter into the 9VDC jack on the rear of the cradle.

The PS6S1800M cradle is compatible with the power adapter used by your Symbol 1700 or 1800 terminal. If replacing the power adapter, US users may use the Mobility Power Adapter PN 170182-002, a universal “auto-switching” power adapter. This product ships with a detachable US Standard 110V power cord that might be changed to match other power receptacles, if you have a different power requirement. You might also use a power cord converter to allow the power adapter to plug into other power receptacles. If you have any other questions, contact Mobility.

HotSync Connection

Before you prepare the PS6S1800M cradle for HotSync communications, you must decide which type of HotSync communication you desire. (1) HotSync with the computer, or (2) HotSync with a remote location.