invision Serial/Modem Charging Cradle User Guide
Symptom: Attempt by the cradle to HotSync the terminal through the modem failed.
Possible Cause | Action |
The terminal was removed from the | Place the terminal back in the cradle to allow the |
cradle while the HotSync was in | cradle to make another HotSync attempt. |
progress. |
|
|
|
Terminal or cradle was disconnected from | Unplug the modem cable for 30 seconds to allow |
the telephone line while the HotSync was | the local telephone connection to hang up. Be |
in progress. | sure to close any open windows on the terminal |
| and any modem connections. |
|
|
Terminal’s battery is dead. | Wait for two (2) minutes before trying a HotSync |
| again to allow the battery to recharge. |
|
|
Active Error dialog box on terminal. | The Error dialog box on the terminal must be |
| cleared. Use the stylus to press “OK” on the |
| terminal’s touchscreen. |
|
|
Modem or telephone lines being operated | Modify init string in US/Canada to “AT&F\N5” |
in an electrically noisy environment. | forcing MNP error correction, or |
| “AT&F+MS=V32B” forcing B32bis (14,400 bps) |
| connection. |
| For International operation use |
| “AT&F\N5;+GCI=xx;” forcing MNP error |
| correction or “AT&F+MS=V32B;+GCI=xx;” |
| forcing V32bis (14,400 bps) connection. |
|
|
Mobility Electronics, Inc | 8 |
|
|