Pico Macom PFAM860SAW Specifications, PLM860SAW, Audio, Video, General, Ordering Information

PLM860SAW Manual.qxd 7/31/03 2:28 PM Page 5

Specifications

PLM860SAW

860MHz Single-Channel PLL Saw-Filtered A/V Modulator

PLM860SAW860MHz Channelized-Agile PLL SAW-Filtered A/V Modulator

POWER	TEST	RF OUTPUT	AUDIO	AURAL	VIDEO
	POINT	LEVEL	MODULATION	LEVEL	MODULATION

CH-

-30dB

Front View

RF OUT

VIDEO IN AUDIO IN

Rear View

120VAC

60Hz 10W

600W MAX

RF

	Channels:	113 Channels
	Frequency Range:	(CATV 23-135)
		216 - 860 MHz
	Output Impedance:	75 ohms
	RF Output Level:	45 to 55 dBmV typical,
	Frequency Accuracy/Stability:	adjustable from front panel
		±10 kHz, ±5 kHz in
		aeronautical band.
	Spurious Output:	Conforms to FCC Docket 21006
		>-60 dB below video carrier
	Audio/Video Ratio:	with A/V ratio @-15 dB
		Adjustable -7 to -18 dB
	Audio Input Level:	0.5 V p-p for 25 kHz
Audio
	Preemphasis:	peak deviation
		75 microseconds
	Flatness:	1.5 dB maximum
		50 Hz to 15 kHz

Video

Video Input Level:	1.0 V p-p minimum for
Input Type:	87.5% modulation
	Composite video negative sync
Visual:	C/N>62 dB @ 4 MHz BW
Frequency Response:	±1.5 dB 30Hz to 4.2 MHz
Differential Gain:	<5%
Differential Phase:	<5°
Hum And Noise:	-60 dB @ 87.5% modulation
Phase Noise:	-100 dBc/Hz

Meets FCC group delay predistortion correction requirement for color transmission.

General

Power Input:	108-125 VAC 60 Hz 20 W
Operation Temperature:	-10°C to 50°C
Dimensions:	19˝(L) x 3˝(D) x 13/4˝(H)
Weight:	3.9 lbs.
Connectors:	All “F” type

Ordering Information

PLM860SAW – Channel

Specify CATV or UHF

Ph: 800-421-6511 www.picomacom.com 5

Rev. 06/03