Husky 716 Dimensions
*Pumps with duckbill check valves are shipped with the inlet manifold on top and the outlet manifold on the bottom. To make the inlet manifold on the bottom and the outlet manifold on the top, rotate each of the four duckbill assemblies vertically 180_ as shown below.
139
201
202
SIDE VIEW
|
| 2.76 in. |
|
3/4 npt(f) |
| (62.5 mm) |
|
or bspt(f) |
|
|
|
Fluid Outlets * |
|
|
|
|
|
|
|
1/4 npt(f) Air Inlet
7.37in.
(187.2 mm)
| FRONT VIEW | |
4.25 in. |
|
|
| 4.44 in. | |
(108.0 mm) |
| (112.8 mm) |
|
|
|
|
|
|
6.62 in.
(168.1 mm)
3/4 npt(f) or bspt(f) Fluid Inlets *
Note: Bottom port open on 243305,
243306, 243307, and 246485 only.
3/4 npt(f), bspt(f), or bspp(f) Fluid Outlet *
10.43 in.
(264.9
mm)
9.18 in.
(233.2
mm)
7.80in.
(198.1
mm)
1.38in.
(35.1 mm)
3/4 npt(f), bspt(f), or bspp(f) Fluid Outlet *
4.29 in.
(109.0 mm)
6.04 in.
(153.4 mm)
PUMP MOUNTING HOLE PATTERN
Four 0.28 in. (7.1 mm) Diameter Slots
4.29in.
(109.0 mm)
6.62 in.
(168.1 mm)
3/4 npt(f) or bspt(f) Fluid Inlets *
9078A
308981 33
