Husky 515 Technical Data
Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7 bar) Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 100 psi (0.2 to 0.7 MPa, 2.1 to 7 bar ) Operating Temperature Range*
Minimum (all pumps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40_F (4_C) Maximum
Acetal: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180_F (82_ C)
Polypropylene: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150_F (66_C)
Aluminum, stainless steel, PVDF: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225_F (107_C)
Maximum air consumption | 28 scfm (0.672 cubic meters/min.) |
Maximum free flow delivery (1/2 in. ports) | . . . . . . . . . . . . . . 15 gpm (57 l/min) |
Maximum pump speed | . . . . . . . . . . . . . . . . . . . . . . 400 cpm |
Gallons (Liters) per cycle | . . . . . . . . . . . . . . . . . . . . 0.04 (0.15) |
Maximum suction lift (water w/buna balls) | . . . . . . . . . . . . . . . 15 ft (4.5 m) dry, |
| 25 ft (7.6 m) wet |
Maximum size pumpable solids | . . . . . . . . . . . . . . 3/32 in. (2.5 mm) |
Sound power level (measured per ISO standard |
|
At 70 psig (0.48 MPa, 4.8 bar) at 50 cycles per minute | . . . . . . . . . . . . . . . . . . . . . . 77 dBa |
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute | . . . . . . . . . . . . . . . . . . . . . . 95 dBa |
Sound pressure level (measured 1 meter from pump) |
|
At 70 psig (0.48 MPa, 4.8 bar) at 50 cycles per minute | . . . . . . . . . . . . . . . . . . . . . . . 67 dBa |
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute | . . . . . . . . . . . . . . . . . . . . . . . 85 dBa |
Air inlet size | . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f) |
Air exhaust port size | . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f) |
Fluid inlet size | . . . 1/2 and 3/4 in. npt(f) or bspt(f) |
Fluid outlet size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 and 3/4 in. npt(f) or bspt(f) Wetted parts (in addition to ball, seat, and diaphragm materials, which vary by pump)
Polypropylene pumps | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . polypropylene, PTFE |
Acetal pumps | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . groundable acetal, PTFE |
PVDF pumps | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PVDF, PTFE |
polypropylene, stainless steel, polyester and aluminum (labels), | |
|
Weight (approximate)
Polypropylene pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 lb (2.9 kg) Acetal pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8 lb (3.5 kg) PVDF pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 lb (3.9 kg)
*These temperatures are based on mechanical stress only and may be altered significantly by pumping certain chemicals. Consult engineering guides for chemical compatibilities and temperature limits, or contact your Graco distributor.
Santoprener is a registered trademark of the Monsanto Company.
Loctiter is a registered trademark of the Loctite Corporation.
30 308981