Jonsered CS 2147 manual Technical Data, Technical data

TECHNICAL DATA

Technical data

	CS 2147	CS 2152
Engine
Cylinder displacement, cm3	45,0	51,7
Cylinder bore, mm	42,0	45
Stroke, mm	32,5	32,5
Idle speed, rpm	2700	2700
Recommended max. speed, rpm	14200	13000
Power, kW/ rpm, Europe	2,5/9600	2,4/9000
Power, kW/ rpm, Australia	-	2,4/9000
Ignition system
Manufacturer of ignition system	SEM	SEM
Type of ignition system	CD	CD
Spark plug	NGK BPMR 7A	NGK BPMR 7A
	Champion RCJ 7Y	Champion RCJ 7Y
Electrode gap, mm	0,5	0,5
Fuel and lubrication system
Manufacturer of carburettor	Zama	Zama
Carburettor type	C3-EL18	C3-EL18
Fuel tank capacity, litre	0,5	0,5
Oil pump capacity at 9,000 rpm, ml/min	5-12	5-12
Oil tank capacity, litre	0,28	0,28
Type of oil pump	Automatic	Automatic
Weight
Chain saw without bar or chain, empty tanks, kg	5,0: CS 2147 5,1:CS	5,0: CS 2152, CS
	2147 W, CS 2147	2152 C
	CWH	5,1: CS 2152 W, CS
		2152 WH, CS 2152
		CW, CS 2152 CWH
Noise emissions
(see note 1)
Sound power level, measured dB(A)	114: CS 2147,	112: CS 2152 C, CS
	113: CS 2147 CWH	2152 CW, CS 2152
		CWH
		113: CS 2152, CS
		2152 W, CS 2152 WH
Sound power level, guaranteed LWA dB(A)	115: CS 2147	113: CS 2152 C, CS
	114: CS 2147 CWH	2152 CW, CS 2152
		CWH
		114: CS 2152, CS
		2152 W, CS 2152 CW,
		CS 2152 WH
Noise levels
(see note 2)
Equivalent noise pressure level at operator’s ear,
measured according to relevant international standards,
dB(A)
Europe:	102	102
Australia:	-	102
Vibration levels
(see note 3)
Front handle,/Rear handle, m/s2 (Europe)	2,9/2,9	3,0/4,1
Front handle,/Rear handle, m/s2 (Australia)	-	3,0/4,1
Chain/bar
Standard bar length, inch/cm	13"/33	13"/33
Recommended bar lengths, inch/cm	13-20"/33-50	13-20"/33-50
Usable cutting length, inch/cm	12-19"/31-49	12-19"/31-49
Chain speed at max. power, m/sec	18,5	17,3
Pitch, inch/mm	0,325/8,25	0,325/8,25
Thickness of drive links, inch/mm	0,050/1,3	0,050"/1,3mm
	0,058/1,5	0,058/1,5
Number of teeth on drive sprocket	7	7

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Equivalent noise pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure levels under

various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.

Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under various working

conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.

36 – English