Jonsered CS 2147 Muffler, Checking brake band wear, Checking the hand guard, Safety Instructions

Models: CS 2147

1 40
Download 40 pages 13.43 Kb
Page 7
Image 7
Muffler

SAFETY INSTRUCTIONS

Muffler

The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.

WARNING! The exhaust fumes from the

!engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

In areas with a hot, dry climate there is a high risk of fires. These areas are sometimes controlled by legislation and requirements that among other things the muffler must be equipped with an approved type of spark arrestor mesh.

For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and servicing the machine’s safety equipment.

WARNING! The muffler gets very hot in use

!and remains so for a short time afterwards. Do not touch the muffler if it is hot!

WARNING! The catalytic converter muffler

!gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.

Checking, maintaining and servicing the machines safety equipment

WARNING! All servicing and repair work on

!the machine requires special training.This is especially true of the machines safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.

Chain brake and hand guard

Checking brake band wear

Brush off any wood dust, resin and dirt from the chain brake and clutch drum. Dirt and wear can impair operation of the brake.

Regularly check that the brake band is at least 0.6 mm thick at its thinnest point.

Checking the hand guard

Make sure the hand guard is not damaged and that there are no visible defects such as cracks.

Move the hand guard forwards and back to make sure it moves freely and that it is securely anchored to the clutch cover.

English – 7

Page 7
Image 7
Jonsered CS 2147 manual Muffler, Checking brake band wear, Checking the hand guard, Safety Instructions