Graco Inc 716, D 5 D, D 5 B, D 5 5, D 5 E, D 5 A HD Overmolded Diaphragm, Service, Diaphragms Husky

Service

Diaphragms (Husky 515)

			11
			}1
		114	}12
	103
7	109	106	15	3
	2
			}416 1

	6 5	5	6
	4	}401
	402} 4
105	6
101	401} 4
			6
109	7
	102	HD Overmolded Diaphragm

}Included in Fluid Section Repair Kit D05XXX

4

13

3

109 7

Fig. 9

1Install with lips facing out of center housing (11).

2Torque to 35 to 45 in-lb (4.0 to 5.1 N-m).

3Apply grease.

4The words “AIR SIDE” on diaphragms (and on backup diaphragms required on PTFE models) must face toward diaphragm shaft (15).

Flat side of air-side diaphragm plate must face toward

5diaphragm shaft (15).

Apply medium-strength (blue) LoctiteR or equivalent

6to threads, and torque to 80 to 90 in-lb (9 to 10 N-m) at 100 rpm maximum.

Torque to 80 to 90 in-lb (9 to 10 N-m). See Torque Se-

7quence, page 29.

18 308981