INSTALLATION - with harness system and LATCH
1
2
3
Place
Lift seat pad flap (on certain models), check to make sure LATCH belt is properly routed through openings and attach LATCH belt to lower anchorage points (fig. a).
Press down firmly in center of car seat to compress vehicle seat cushion while tightening LATCH belt.
Use your knee to press down in center of car seat (fig. b).
4Pull front to back and left to right to check for secure installation (fig. c). LATCH belt MUST stay tight.
5Attach tether hook (A) to anchor hardware (B) and tighten strap to remove any slack (fig. d).
10