
OPERATIONS and ADJUSTMENTS
1 ![]()
Harness![]()
Straps![]()
![]()
(fig.![]()
a):![]()
![]()
![]()
•To tighten: Pull lower belt tab.
•To loosen: Pull upper belt tab while pulling harness straps.
2 

Harness


Tie:










•To open: Press tab and pull apart (fig. b).
•To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.
3 


Buckle:
















•To lock: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.
•To unlock: Press red button and pull tongues out of buckle.
4 


Recline


(fig.


c):







•Recline: Slide tab on front of car seat to allow recline foot to drop down.
•Upright: Slide and hold tab on front of car seat while pushing recline foot up. Release tab to lock foot.
5 ![]()
![]()
Armrests![]()
![]()
![]()
(fig.![]()
![]()
d):![]()
![]()
![]()
![]()
![]()
![]()
![]()
•Push in button on front side of car seat and rotate armrest up or down.
6 ![]()
![]()
Tether![]()
![]()
Strap![]()
(fig.![]()
![]()
e):![]()
![]()
![]()
![]()
![]()
![]()
•To tighten: Pull loose end of strap.
•To loosen: Lift adjuster
16