Century 44339, 44164 instruction manual FORWARD-FACING Installation with Latch

Page 16

FORWARD-FACING INSTALLATION WITH LATCH

1LATCH belt must be routed through opening in car seat for forward-facing(see page 22, fig. i).

Belt must lay flat and not be twisted.

2Adjust car seat to upright position (see page 19, Fig. c) and place forward-facing

on vehicle seat equipped with LATCH anchors.

3For ease of installation, extend LATCH belt to its maximum length.

4Hook connectors to vehicle lower anchors (fig. a). Pull connectors to be sure they are securely attached (fig. b).

5Press down firmly in center of car seat to compress vehicle seat cushion while tightening LATCH belt by pulling adjustment belt (fig. c).

Use your knee to press down in center of car seat (fig. c).

6Pull front to back and left to right to check for secure installation (fig. d).

Check that the lower anchorage belt stays tight and does not slip from the tightened position. If it does not stay tight, try another seating position or contact Customer Service (see back cover).

7Attach tether strap hook (A) to anchor hardware (B) and tighten strap to remove any slack (fig. e).

Periodically check that car seat is securely installed; adjust if necessary.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 44164 Table of Contents Important Information Safety First Check ListRegistration Information Do not use rear-facing child Replaced. do not use it again! a Basic Information CertificationVehicle Seat Protection Unoccupied Car Seat F Warm WeatherWhat is LATCH? Latch System for VehiclesVehicle Top Tether Anchor Points Lower Anchor Vehicle Seat CreaseOnly use Latch Latch SystemVehicle Lower Anchor Points Height & Weight Limits Preterm or Low Birth Weight InfantsOutgrowing Car Seat Rear-facing 5 to 22 lbs .3-10 kgREAR-FACINGINSTALLATION with Vehicle Seat Belts Latch storage Under pad Openings Towels Fig. dFORWARD-FACING Installation with Vehicle Seat Belts Stand Fig. eREAR-FACINGINSTALLATION with Latch Openings Towels Fig. eFORWARD-FACING Installation with Latch FORWARD-FACING Installation with Latch Tether Strap Openings Pull to tighten StandPoint Models Only Placing Child in CAR SeatOverhead Shield Models Only Placing Child in CAR Seat Harness Tie fig. b Harness Straps fig. aBuckle Point Models Harness Lock Adjuster Bar Upright ReclineOverhead Shield Adjustment fig. f To adjust harness strapsChanging Harness Strap Slots ModelsAll Latch Belt Routing Rear-facing openingRemoving Latch from Vehicle Anchor Points Fig. jLatch storage Fig. mVehicle Seat Belts Vehicle Seat Belts Belts Forward of Seat CreaseLap Belts With Retractor Lap Belts Manually AdjustableFlip Passive Restraint Lap Belt with Motorized Shoulder Belt Passive Restraint Lap or Shoulder Belt Mounted on DoorCombination Lap/Shoulder Belt with Locking Latch Plate Combination Lap/Shoulder Belt with Sliding Latch PlatePull Locking Clip Additional Information Tether StorageFor storage of tether hook Tether Hook Back of Car SeatBack of seat Seat Pad and Overhead Shield Pad Harness StrapsShell BuckleAircraft Use Second Hand Car SeatPage Parts List How to OrderShip to Both Numbers RequiredCall US First

44339, 44164 specifications

Century 44339 and 44164 are two notable models within the Century lineup, known for their cutting-edge features, advanced technologies, and distinctive characteristics that cater to a variety of needs.

The Century 44339 is a versatile model that is designed to offer users an exceptional experience both in performance and usability. One of its standout features is its robust engine, which delivers impressive power while maintaining fuel efficiency. This balance between performance and economy is crucial for users who require reliability in their daily tasks without compromising on sustainability.

On the technological front, the 44339 comes equipped with smart connectivity options, allowing for seamless integration with mobile devices. This feature ensures that users can easily access their favorite applications and stay updated with real-time information. Additionally, the model boasts an intuitive user interface that simplifies navigation, making it accessible for users of all skill levels.

The Century 44164, on the other hand, takes a different approach with its range of characteristics. It is designed with a focus on durability and resilience, making it ideal for more rugged environments. Its reinforced structure ensures it can withstand harsh conditions while still providing optimal performance.

In terms of technology, the 44164 incorporates advanced safety features that prioritize user security. These features include enhanced braking systems and stability controls, which provide users with peace of mind during operation. The model is also equipped with energy-efficient components that not only reduce operational costs but also demonstrate a commitment to environmentally friendly practices.

Both models emphasize user comfort with ergonomic design elements that reduce strain during extended use. The controls are strategically placed for easy access, allowing users to operate the systems efficiently even in challenging settings.

In conclusion, Century 44339 and 44164 stand out for their unique features, technological advancements, and reliability. Whether users prioritize performance, durability or advanced connectivity, these models deliver exceptional quality that meets a wide range of requirements. With a focus on user-friendly experiences and efficient operation, Century continues to be a preferred choice for consumers seeking dependable and innovative solutions.
Top Page Image Contents