Century 44339, 44164 instruction manual Locking Clip

Page 32

VEHICLE SEAT BELTS (continued)

FLockingClip

WARNING

Avoid serious injury or death:

•Failure to use locking clip where required will result in car seat not being securely held in place.

•Remove locking clip from seat belts when not being used with car seat.

•DO NOT use locking clip as a vehicle seat belt shortener.

You MUST use locking clip provided with car seat with a vehicle seat belt that slides freely through the latch plate or the lap belt cannot be tightly secured.

1Install car seat and tighten vehicle seat belt.

2Hold seat belts together at latch plate (fig. a) then unbuckle.

3Slide locking clip on seat belts approximately 1/2 inch (1 cm) away from latch plate.

4Re-buckle seat belt.

30

5Test installation to see if car seat is secure.

If not secure, additional belt tightening may be required:

•Unbuckle vehicle seat belt.

•Hold belts together and remove locking clip.

•Shorten length of lap belt portion slightly by pulling belt through latch plate.

•Re-attach locking clip.

•Buckle vehicle seat belt.

Press car seat further down into vehicle

seat cushion to help buckle vehicle seat belt.

Test installation to see if car seat is secure. If not secure, repeat above step until secure.

1/2 inch (1 cm) (fig. a)

Page 31 Page 33
Image 32
Page 31 Page 33
Contents 44164 Table of Contents Registration Information Safety First Check ListImportant Information Do not use rear-facing child Replaced. do not use it again! a Basic Information CertificationVehicle Seat Protection Unoccupied Car Seat F Warm WeatherWhat is LATCH? Latch System for VehiclesVehicle Top Tether Anchor Points Lower Anchor Vehicle Seat CreaseVehicle Lower Anchor Points Latch SystemOnly use Latch Height & Weight Limits Preterm or Low Birth Weight InfantsOutgrowing Car Seat Rear-facing 5 to 22 lbs .3-10 kgREAR-FACINGINSTALLATION with Vehicle Seat Belts Latch storage Under pad Openings Towels Fig. dFORWARD-FACING Installation with Vehicle Seat Belts Stand Fig. eREAR-FACINGINSTALLATION with Latch Openings Towels Fig. eFORWARD-FACING Installation with Latch FORWARD-FACING Installation with Latch Tether Strap Openings Pull to tighten StandOverhead Shield Models Only Placing Child in CAR SeatPoint Models Only Placing Child in CAR Seat Buckle Point Models Harness Straps fig. aHarness Tie fig. b Harness Lock Adjuster Bar Upright ReclineChanging Harness Strap Slots To adjust harness strapsOverhead Shield Adjustment fig. f ModelsAll Latch Belt Routing Rear-facing openingRemoving Latch from Vehicle Anchor Points Fig. jLatch storage Fig. mVehicle Seat Belts Vehicle Seat Belts Belts Forward of Seat CreaseFlip Lap Belts Manually AdjustableLap Belts With Retractor Passive Restraint Lap Belt with Motorized Shoulder Belt Passive Restraint Lap or Shoulder Belt Mounted on DoorPull Combination Lap/Shoulder Belt with Sliding Latch PlateCombination Lap/Shoulder Belt with Locking Latch Plate Locking Clip Additional Information Tether StorageFor storage of tether hook Tether Hook Back of Car SeatBack of seat Seat Pad and Overhead Shield Pad Harness StrapsShell BuckleAircraft Use Second Hand Car SeatPage Parts List How to OrderShip to Both Numbers RequiredCall US First

44339, 44164 specifications

Century 44339 and 44164 are two notable models within the Century lineup, known for their cutting-edge features, advanced technologies, and distinctive characteristics that cater to a variety of needs.

The Century 44339 is a versatile model that is designed to offer users an exceptional experience both in performance and usability. One of its standout features is its robust engine, which delivers impressive power while maintaining fuel efficiency. This balance between performance and economy is crucial for users who require reliability in their daily tasks without compromising on sustainability.

On the technological front, the 44339 comes equipped with smart connectivity options, allowing for seamless integration with mobile devices. This feature ensures that users can easily access their favorite applications and stay updated with real-time information. Additionally, the model boasts an intuitive user interface that simplifies navigation, making it accessible for users of all skill levels.

The Century 44164, on the other hand, takes a different approach with its range of characteristics. It is designed with a focus on durability and resilience, making it ideal for more rugged environments. Its reinforced structure ensures it can withstand harsh conditions while still providing optimal performance.

In terms of technology, the 44164 incorporates advanced safety features that prioritize user security. These features include enhanced braking systems and stability controls, which provide users with peace of mind during operation. The model is also equipped with energy-efficient components that not only reduce operational costs but also demonstrate a commitment to environmentally friendly practices.

Both models emphasize user comfort with ergonomic design elements that reduce strain during extended use. The controls are strategically placed for easy access, allowing users to operate the systems efficiently even in challenging settings.

In conclusion, Century 44339 and 44164 stand out for their unique features, technological advancements, and reliability. Whether users prioritize performance, durability or advanced connectivity, these models deliver exceptional quality that meets a wide range of requirements. With a focus on user-friendly experiences and efficient operation, Century continues to be a preferred choice for consumers seeking dependable and innovative solutions.
Top Page Image Contents