Century 44339, 44164 instruction manual REAR-FACINGINSTALLATION with Latch

Page 14

REAR-FACINGINSTALLATION WITH LATCH

1LATCH belt must be routed through opening in car seat for rear-facingmode. (see page 22, fig. h )

Belt must lay flat and not be twisted.

2Adjust car seat to recline position (see pages 18 and 19, fig. c) and place rear-facingon vehicle seat equipped with LATCH anchors.

3For ease of installation, extend LATCH belt to its maximum length.

4Hook connectors to vehicle lower anchors (fig. a). Pull connectors to be sure they are securely attached anchor points. (fig. b).

5Press down firmly in center of car seat to compress vehicle seat cushion while tightening LATCH belt by pulling adjustment belt (fig. c).

6Pull front to back and left to right to check for secure installation (fig. d).

Check that the lower anchorage belt stays tight and does not slip from the tightened position. If it does not stay tight, try another seating position or contact Customer Service (see back cover).

7Check level indicator on car seat. Vehicle must be on level ground and child in car seat when checking level indicator.

Ball MUST be entirely in green zone (fig. e). If necessary, place rolled towels under car seat, at vehicle seat crease, until entire ball is in green zone. Then re-check level indicator.

DO NOT use tether rear-facing. Tether must be stored (see “Tether Storage” page 31).

Periodically check that car seat is securely installed and properly leveled; adjust if necessary.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 44164 Table of Contents Registration Information Safety First Check ListImportant Information Do not use rear-facing child Replaced. do not use it again! a Vehicle Seat Protection Basic InformationCertification Unoccupied Car Seat F Warm WeatherVehicle Top Tether Anchor Points Lower Anchor What is LATCH?Latch System for Vehicles Vehicle Seat CreaseVehicle Lower Anchor Points Latch SystemOnly use Latch Outgrowing Car Seat Height & Weight LimitsPreterm or Low Birth Weight Infants Rear-facing 5 to 22 lbs .3-10 kgREAR-FACINGINSTALLATION with Vehicle Seat Belts Latch storage Under pad Openings Towels Fig. dFORWARD-FACING Installation with Vehicle Seat Belts Stand Fig. eREAR-FACINGINSTALLATION with Latch Openings Towels Fig. eFORWARD-FACING Installation with Latch FORWARD-FACING Installation with Latch Tether Strap Openings Pull to tighten StandOverhead Shield Models Only Placing Child in CAR SeatPoint Models Only Placing Child in CAR Seat Buckle Point Models Harness Straps fig. aHarness Tie fig. b Harness Lock Adjuster Bar Upright ReclineChanging Harness Strap Slots To adjust harness strapsOverhead Shield Adjustment fig. f ModelsAll Latch Belt Routing Rear-facing openingRemoving Latch from Vehicle Anchor Points Fig. jLatch storage Fig. mVehicle Seat Belts Vehicle Seat Belts Belts Forward of Seat CreaseFlip Lap Belts Manually AdjustableLap Belts With Retractor Passive Restraint Lap Belt with Motorized Shoulder Belt Passive Restraint Lap or Shoulder Belt Mounted on DoorPull Combination Lap/Shoulder Belt with Sliding Latch PlateCombination Lap/Shoulder Belt with Locking Latch Plate Locking Clip For storage of tether hook Additional InformationTether Storage Tether Hook Back of Car SeatBack of seat Shell Seat Pad and Overhead Shield PadHarness Straps BuckleAircraft Use Second Hand Car SeatPage Parts List How to OrderShip to Both Numbers RequiredCall US First

44339, 44164 specifications

Century 44339 and 44164 are two notable models within the Century lineup, known for their cutting-edge features, advanced technologies, and distinctive characteristics that cater to a variety of needs.

The Century 44339 is a versatile model that is designed to offer users an exceptional experience both in performance and usability. One of its standout features is its robust engine, which delivers impressive power while maintaining fuel efficiency. This balance between performance and economy is crucial for users who require reliability in their daily tasks without compromising on sustainability.

On the technological front, the 44339 comes equipped with smart connectivity options, allowing for seamless integration with mobile devices. This feature ensures that users can easily access their favorite applications and stay updated with real-time information. Additionally, the model boasts an intuitive user interface that simplifies navigation, making it accessible for users of all skill levels.

The Century 44164, on the other hand, takes a different approach with its range of characteristics. It is designed with a focus on durability and resilience, making it ideal for more rugged environments. Its reinforced structure ensures it can withstand harsh conditions while still providing optimal performance.

In terms of technology, the 44164 incorporates advanced safety features that prioritize user security. These features include enhanced braking systems and stability controls, which provide users with peace of mind during operation. The model is also equipped with energy-efficient components that not only reduce operational costs but also demonstrate a commitment to environmentally friendly practices.

Both models emphasize user comfort with ergonomic design elements that reduce strain during extended use. The controls are strategically placed for easy access, allowing users to operate the systems efficiently even in challenging settings.

In conclusion, Century 44339 and 44164 stand out for their unique features, technological advancements, and reliability. Whether users prioritize performance, durability or advanced connectivity, these models deliver exceptional quality that meets a wide range of requirements. With a focus on user-friendly experiences and efficient operation, Century continues to be a preferred choice for consumers seeking dependable and innovative solutions.
Top Page Image Contents