Harness Buckle Fastening the Harness Buckle

Child Seat Functions

Harness Buckle

Fastening the Harness Buckle

1Hold the harness buckle with one hand.

2Use your other hand to insert one buckle tongue at a time into the harness buckle (Fig. A).

•A proper connection is confirmed with an audible click after inserting each buckle tongue.

Releasing the Harness Buckle

1Brace the rear of the harness buckle with one hand.

2Use your thumb to press the release button and slide both buckle tongues to remove from the buckle (Fig. B).

IMPORTANT: Periodically clean the harness buckle to ensure safe operation. See page 39.

Child Seat Functions

How to Adjust Harness Height

IMPORTANT: See Important Harness Adjustments on pages 6–7 for instructions on proper harness fit based on your child’s height and weight.

1	Loosen the harness by lifting the harness
	adjuster lever while pulling the harness
	straps forward as far as possible.	c
2	Rotate the head restraint adjustment knob	c
	on either side of the child seat to raise or
	lower the head restraint and harness (Fig. C).

NOTE: DO NOT force the head restraint adjustment knob in either direction. If the knob is difficult to turn, the head restraint may be at maximum or minimum height, the harness may be tight, or the child’s weight is pressing against the head restraint cover.