Britax CS Harness Buckle Removal, Cleaning the Harness Buckle, Re-threading the Harness Buckle

Page 21

Care and Maintenance

Care and Maintenance

Harness Buckle Removal

1Recline the child seat.

2Locate the metal buckle strap retainer on the bottom of the child seat.

3Pull the retainer away from the child seat to loosen.

4Turn the retainer so the short side will fit through the slot in the child seat shell (Fig. A).

5Push the retainer through the slots in the shell and cover, to the top of the child seat.

A

Cleaning the Harness Buckle

If a child eats and drinks while in the child seat, the harness buckle may need to be periodically checked and cleaned of any food, drink or other debris.

• REMOVE BUCKLE as described above.

• RINSE THOROUGHLY using warm water

b

(Fig. B).

TEST THE HARNESS BUCKLE by fastening

(Fig. C) and unfastening (Fig. D) until a click is heard after inserting each buckle tongue.

Re-threading the Harness Buckle

1Locate the slot in cover and shell for the harness buckle.

2Turn the buckle retainer so the short side will fit through the slot in the cover and the child seat shell (Fig. A).

3Push the retainer through the slots in the shell and cover, to the bottom of the child seat.

4Pull the harness buckle away from the child seat until tight and verify the strap is not twisted and the release button is facing outward.

If either click is not heard, repeat cleaning procedure.

• TOWEL DRY

• DO NOT lubricate, use solvents, abrasive

c

 

 

cleaners, soap or other household

 

 

 

detergents.

 

 

 

 

 

 

d

38

39

Image 21
Contents Boulevard CS Table of Contents Page Important Notes Safety InformationCertification RegistrationRear-Facing Important Harness AdjustmentsForward-Facing Forward-Facing Harness HeightChild Seat Features Incompatible Vehicle Seat Belts Vehicle CompatibilityVehicle Buckle Positions Vehicle Seating PositionsLatch Installation Installation Rear-FacingVehicle belt can be routed over or under cover Lap-Shoulder Belt InstallationFigure a illustrates a rear-facing, lap-belt installation Lap-Belt InstallationLatch Installation Installation Forward-FacingFig. E Figure a illustrates a forward-facing, lap-belt installation Installation Versa-Tether Installation AircraftRear-Facing Installation Forward-Facing InstallationTether Connector Strap Using the Versa-TetherInstallation Versa-Tether Child Seat Functions Switching the Latch ConnectorsEnergy-Absorbing Tether Adjusting the Chest Clip Storing the Latch ConnectorsChest Clip Fastening the Chest Clip Releasing the Chest ClipHow to Adjust Harness Height Harness Buckle Fastening the Harness BuckleReleasing the Harness Buckle Buckling and Tightening the Harness Securing Your ChildCare and Maintenance Cleaning the Harness Buckle Harness Buckle RemovalRe-threading the Harness Buckle Limited ONE-YEAR Warranty WarrantyPage Checklist before tightening harness Click & Safe Snug Harness Indicator
Related manuals
Manual 23 pages 26.42 Kb