REAR-FACING INSTALLATION WITH LATCH
1Adjust child restraint to recline position (fig. a). Flip recline feet under child restraint for rear facing use.
2Place
3For ease of installation, extend LATCH belt to its maximum length.
4(OOK CONNECTORSNTO VEHICLE LOWER ANCHORS
(fig. b). Belt must lay flat and not be twisted. Pull connectors to be sure they are securely attached to the anchor points. (fig. c).
#HECK#THAT THE LOWER ANCHORTBELT STAYS TIGHT and does not slip from the tightened position. If it does not stay tight, try another seating
POSITION ORICONTACTN#USTOMER 3ERVICE
7#HECK#LEVELCINDICATORVON CHILD RESTRAINT (fig. f).
Vehicle must BEBON LEVEL GROUNDVANDLCHILDRIN U CHILDCRESTRAINT WHEN CHECKINGILEVEL INDICATOR
Ball MUST be entirely in green zone (fig. f). If necessary, place rolled towels under child
RESTRAINT ATRVEHICLETSEAT CREASE UNTIL ENTIRE BALL A IS INIGREENIZONEG 4HENERECHECK LEVEL INDICATOR
DO NOT use tether
50RESSEDOWN lRMLY INNCENTER OFLCHILDIRESTRAINTN 0ERIODICALLY CHECK THATYCHILDHRESTRAINTTIS SECURELYH while pulling LATCH adjustment belt. (fig. d). INSTALLED AND PROPERLYALEVELED ADJUSTDIF NECESSARY
60ULL FRONT TORBACK AND LEFT TO RIGHT ATABELT PATH 4OOREMOVE LATCHSEE h2EMOVING LATCH from
TO CHECK FOR SECUREFINSTALLATION (fig. e).6EHICLE !NCHOR 0OINTSv PR
16