FORWARD-FACING INSTALLATION WITH LATCH
1Adjust child restraint to Upright position (fig. a). Flip recline feet out for forward facing use.
2Place
For ease of installation, extend LATCH belt to its maximum length.
3(OOK CONNECTORSNTO VEHICLE LOWER anchors (fig. b). Belt must lay flat and not be twisted. Pull connectors to be sure they are securely attached (fig. c).
43LIDEICHILD RESTRAINTDBACK UNTIL THE RESTRAINTRIS INNCONTACTSWITH THE VEHICLE SEAT BACK
5Press down firmly in center of child restraint to
COMPRESS VEHICLE SEATECUSHIONLWHILESTIGHTENING
LATCH belt by pulling adjustment belt (fig. d).
60ULL FRONT TORBACK AND LEFT TO RIGHT ATABELT PATHE TO CHECK FOR SECUREFINSTALLATION (fig. e).
7#HECKETHAT THE LOWER ANCHOREBELT STAYS TIGHT and does not slip from the tightened position. If it does not stay tight, try another seating
POSITION ORICONTACTO#USTOMER 3ERVICE
8!TTACH TETHER STRAPTHOOK (A) to anchor hardware (B) and tighten adjustment belt to
REMOVE ANY SLACK (fig. f).
Belt must lay flat and not be twisted.
0ERIODICALLY CHECK THATYCHILDHRESTRAINTTIS SECURELY INSTALLEDIADJUST IFLNECESSARY
4OOREMOVE LATCHSEE h2EMOVING LATCH from 6EHICLE !NCHOR 0OINTSv PR
18