INSTALLATION WITH VEHICLE SEAT BELT
WARNING
LATCH belt MUST be stored when
using vehicle seat belt to install car seat.
See “LATCH Storage” on p. 29.
1Place car seat
2Thread vehicle lap belt through car seat Slots and buckle belt.
NOTE: Vehicle shoulder belt must NOT be placed through car seat Slots.
3Press down firmly on car seat to compress vehicle seat cushion while tightening vehicle lap belt (fig. a).
4
5
6
Pull front to back and left to right to check for secure installation (fig. b). Vehicle lap belt MUST stay tight.
If not secure, see “Vehicle Seat Belts” section, p.22.
Check level indicator on car seat.
Vehicle must be on level ground
and child in car seat when checking level indicator.
Ball MUST be entirely in green zone (fig. c). If necessary, place rolled towels under car seat, at vehicle seat crease, until entire ball is in green zone. Then
Adjust handle (on certain models) to a position behind car seat.
Periodically check that car seat is securely installed and properly leveled; adjust if necessary.
12