6.2.2 With LATCH
1.For ease of installation, extend LATCH to its maximum length.
2.Place the car seat firmly against the back of a
3.Thread LATCH
through the belt path normally used for the vehicle seat belt .
Belt must lay flat and not be twisted.
4.Hook LATCH
Connectors to vehicle lower anchors. Pull firmly on Connectors to be sure they are attached .
5.Tighten LATCH by pushing down hard on
car seat and pulling the adjustment belt .
6.NEVER put two LATCH connectors on one
vehicle LATCH anchor unless specifically allowed by the manufacturer .
24