To Install Locking Clip: |
|
1. Tighten the buckled |
|
belt by pushing down |
|
hard on the car seat |
|
and pulling hard on the |
|
shoulder belt. |
|
2. While pushing down |
|
on seat, pinch the two |
|
straps together behind |
|
the buckle tongue. |
|
Unbuckle the belt without |
|
allowing it to slip. |
|
3. Connect lap and | |
shoulder belts as | |
shown . | ½” (1.25 cm) |
|
4. Rebuckle belt. Check that lap belt does not move by pulling hard. If belt loosens or lengthens, repeat procedure.
Remove locking clip when not using car seat. Store under it’s tab on the back of seat.
16